wheel spacers

[Mr Lee]

What is the recommended size front and back , fiesta st line ?

 

[FJ16]

Most recommendations I see are simply "don't". If you do run them, 10mm at the most for the sake of wear on your bearings.

I'll admit I've never looked into the issue with any serious intent though.

 

[rallytaff]

I've run 15mm on my 2014 since 2016 and never had a problem.

 

[Woods247]

Same.. I’ve had zero issues and use various spacers from 5mm to 12mm. The odd balls I use are made by these guys https://www.motorsport-tech.com/

 

[rallytaff]

Mine are H & R just like my coilovers. Quality is there.

 

[Evo8]

I run 10mm front and 20mm rear factory wheels 205/45/17 tires on H&R springs with no rubbing.

 

[FlordPerformance]

Avoid the wheel spacers, Buy the correct offset wheels instead.

 

[rallytaff]

I have stock size after market wheels from BRAID and have been using wheel spacers with the appropriate bolts for about 8yrs with NO problems!

 

[Evo8]

If someone wants to keep the factory wheels as well get a different look and fill out the wheel wells... quality hub centric spacers are no issues. I wanted to keep the factory wheels on the Fist so spacers were the fix, two ST's and 60k miles and no issues! I've owned 20+ cars / Jeeps most with aftermarket wheels and some with spacers and never an issue.