To anyone running the 12.2”/11.75” rotor wilwood kit: I would like to gather info on what wheels work with it.
Please post what wheel you have successfully fitted (or those that don’t)and any details on spacers/modifications etc. that you needed to make them work.
Stock Fiesta ST 17x7: clears everywhere, but the front caliper is very close to the spokes. It probably wouldn’t hurt to shim/cheat the caliper inboard slightly to maximize clearance there. (Or maybe run a thin spacer if you really need to, mine didn’t need it)
Sparco Terra 16x7+42: clears everything, but if you have weights on the inside just behind the spokes on the rear wheel, they will have to be relocated because the caliper will just hit them
Enkei RPF1 16x7+43 4x108: fronts will clear, with 8mm spacer, rears are not even close. This wheel is about 14.25” inside diameter, pretty close to the 15” steelie spare that comes with the car
Please post what wheel you have successfully fitted (or those that don’t)and any details on spacers/modifications etc. that you needed to make them work.
Stock Fiesta ST 17x7: clears everywhere, but the front caliper is very close to the spokes. It probably wouldn’t hurt to shim/cheat the caliper inboard slightly to maximize clearance there. (Or maybe run a thin spacer if you really need to, mine didn’t need it)
Sparco Terra 16x7+42: clears everything, but if you have weights on the inside just behind the spokes on the rear wheel, they will have to be relocated because the caliper will just hit them
Enkei RPF1 16x7+43 4x108: fronts will clear, with 8mm spacer, rears are not even close. This wheel is about 14.25” inside diameter, pretty close to the 15” steelie spare that comes with the car
Last edited: