Which Intake upgrade do you have installed?

[Stargate69]

this guy's got to be getting either free parts or discounts as all he does is promote woooosh lol. este man me da risa.

 

[notmyfiesta]

Hello,

My first mod! Planning to have this bad boy installed sometime soon. Got this from my friends over at Arma Speed USA. No plastic or FRP, 100% dry carbon fiber

https://tinyurl.com/yb325opd

 

[Stargate69]

Yeh. At $350 USD, you don’t get a crossover pipe, and you still gotta but the Cobb piece for 16’ & up fiestas($49). This company in chino that does the distribution is considering doing a group buy on this forum and that’ll bring the price down to $300 USD.


Sent from my iPhone using Tapatalk

 

[Stargate69]

Hello,

My first mod! Planning to have this bad boy installed sometime soon. Got this from my friends over at Arma Speed USA. No plastic or FRP, 100% dry carbon fiber

https://tinyurl.com/yb325opd

Takes less than ten minutes to install folks, even a noob like me took eight minutes.


Sent from my iPhone using Tapatalk

 

[trepanned23]

How about:
- stock
- stock + Cobb/Mountune/Green drop-in
- stock + K&N drop-in

?

Because that isn’t an intake upgrade - it’s just a filter changeout.

 

[Stargate69]

Because that isn’t an intake upgrade - it’s just a filter changeout.

Don’t listen to this hater, he’s an idiot.


Sent from my iPhone using Tapatalk

 

[ROCKYFiestta]

who sells the ram air big mouth intake??

 

[SpiceyorangeST]

Just installed my cpe intake and velossa tech snorkel on my 17 today. I also used this # D2BZ-9C047-E. And I got a couple cans of some j9 paint to match the body. Install was very painful but looks awesome.

Sent from my LGLS992 using Tapatalk

 

[trepanned23]

Installed the Mountune Full Induction Kit into the 17 this morning. Very simple install. Quality Parts. 90 minutes to do the job clean. If there’s any increase in hp or torque with the kit in, it might show up on a dyno but I notice no difference in performance or sound

 

[THE COOP]

Probably not going to notice any HP or torque with a Montune intake or a exhaust and has been discussed in many threads, don't really need these mods until you go to a bigger turbo. Did you add a tune with your intake? You'll gain some power with a tune from your AP. I'll be adding a aftermarket FMIC this weekend so I can get a custom Dizzy tune and that should add some power. Read the thread on what mods to add and when. You will have colder air from the intake though which helps. COOP

 

[ron@whoosh]

who sells the ram air big mouth intake??

https://whoosh-motorsports.myshopify.com/collections/2014-2017-ford-fiesta-st/products/2014-2017-fiesta-st-ram-air-big-mouth-intake-free-shipping-all-colors

 

[BlaineP]

2JR Intake and I love it. Its freaking loud though. Takes some getting used to.

 

[Sekred]

Custom intake I made a couple of years ago. Made out of 5mm plastic sheet, measured up a cardboard template first.
Air filter is Nanofiber media I purchased from Amsoil,
https://www.amsoil.com/shop/by-prod...ir/amsoil-ea-universal-air-induction-filters/

 

[TyphoonFiST]

Custom intake I made a couple of years ago. Made out of 5mm plastic sheet, measured up a cardboard template first.
Air filter is Nanofiber media I purchased from Amsoil,
https://www.amsoil.com/shop/by-prod...ir/amsoil-ea-universal-air-induction-filters/

View attachment 18506

View attachment 18507

View attachment 18508

View attachment 18509

View attachment 18510

View attachment 18511

View attachment 18512

Very nice! I always wanted to do this or wait for someone to 3D print a bezel that would accommodate the st200 airbox hose from whoosh! That's pretty sweet!

 

[Sekred]

Thanks for the nice words but I am not selling the intake. I have a few things pulled off the car, like the intake and turbo. I am doing something with the turbo, its a little different and I will share details when I am finished.

 

[TyphoonFiST]

Thanks for the nice words but I am not selling the intake. I have a few things pulled off the car, like the intake and turbo. I am doing something with the turbo, its a little different and I will share details when I am finished.

Yeah...my mistake I'm at work...was looking at multiple threads....but i wish I had the means to make a bezel to accommodate the intake hose myself....I finally moved Into my own house....just getting situated still and figuring out how I'm gonna decorate both of my Garages I now have....one for Toys and tools....the other for the daily drivers.

Sent from my SM-N950U1 using Tapatalk

 

[lowda9]

I got the ramair induction kit with heat shield.

 

[powermatt]

For the Mishimoto people here: have you had any issues with clearance on the bend in the hard pipe around the back right corner of the head?

I had some issues with fit when I first put it on (OEM air duct popped off). I pulled a bit of the hard pipe out of the silicone hose, and that seems to be good now, but I've noticed at some point it rubbed some of the powder coat off the inside of that bend. It's got maybe 3-4mm of clearance right now, and I'm just wondering if that's enough (it doesn't appear to be doing any more rubbing from the last couple days of commuting to work). I'm also wondering if the black powder coat added a mm or two that Mishimoto didn't originally account for.

 

[DangerMouse]

Figured I would finally share this. CPE crossover, MAP intake, Fswerks heat shield and VT big mouth.

https://imgur.com/a/a5tmmK2

 

[vixenlotus]

I had a K&N in for a bit but went back to stock. after about 5K miles i checked it and wiped the intake pipe with a paper towel and came out with some black dust.