What did you do to your Fiesta ST today ?

[Business6]

Installed new oem fog lights to replace my busted one and put Lamin-X yellow film on them. I'm looking forward to seeing it at night because they are damn yellow. Removed the Fiesta badge and gave it a wash, too.

I'm a pretty small guy so I was able to remove and install the fog lights without removing the bumper. Driver's side was a pain due to an electronic piece that sits toward the bottom of the window washer reservoir. Got the entirety of the passenger side done in barely over 5 minutes, though.

 

[TyphoonFiST]

I have complete lamp assemblies with the laminex covering already on them....just never have got around to install them....they have hella bulbs on them....just running LED fogs now in the stockers

Sent from my SAMSUNG-SM-G935A using Tapatalk

 

[joesiris]

Put my vt big mouth in finally


Sent from my iPhone using Tapatalk

is that the glow in the dark one?

 

[jks16]

is that the glow in the dark one?

Yep...it doesn't glow quite as much as I hoped but I'll live with it


Sent from my iPhone using Tapatalk

 

[joesiris]

Yep...it doesn't glow quite as much as I hoped but I'll live with it


Sent from my iPhone using Tapatalk

ive been thinking of getting the black with red trim model, but yours look good, bet its neat to see at night

 

[Cher-Bear]

She earned her stripes!

So after running over a Bungee Cord, which punctured my rear tire while the other end beat the shit out of my car and broke the taillight, since she needed a paint job , it was time to give her the stripes i wanted. He fixed my rims again as well.

 

[HBEcoBeaST]

So after running over a Bungie Cord, which punctured my rear tire while the other end beat the shit out of my car and broke the taillight, since she needed a paint job , it was time to give her the stripes i wanted. He fixed my rims again as well.

Bummer about the hostile bungee.

But your car looks amazing now. The wheels, graphics and paint color and overall theme I give [emoji106] [emoji106] [emoji106]

Sent from my SM-G925V using Tapatalk

 

[DanjenG60]

wash and wax had to bring out the DSLR

What rims are these? Look to be borbets?

 

[FLORIDAST]

Installed new oem fog lights to replace my busted one and put Lamin-X yellow film on them. I'm looking forward to seeing it at night because they are damn yellow. Removed the Fiesta badge and gave it a wash, too.

I'm a pretty small guy so I was able to remove and install the fog lights without removing the bumper. Driver's side was a pain due to an electronic piece that sits toward the bottom of the window washer reservoir. Got the entirety of the passenger side done in barely over 5 minutes, though.

I just installed Morimoto fogs in my Fist and you can access them from the top if you remove the headlights.

 

[TomCat]

So after running over a Bungee Cord, which punctured my rear tire while the other end beat the shit out of my car and broke the taillight, since she needed a paint job , it was time to give her the stripes i wanted. He fixed my rims again as well.

VERY nice!!!

 

[cbizz]

What rims are these? Look to be borbets?

Made by borbets but branded Alufelge Aluett KBA 44555

 

[joesiris]

So after running over a Bungee Cord, which punctured my rear tire while the other end beat the shit out of my car and broke the taillight, since she needed a paint job , it was time to give her the stripes i wanted. He fixed my rims again as well.

looks great, glad you could get it fixed up

 

[darkjedidave]

Last night's project: I found some red vinyl tape and added it to the front and rear bumpers. Added the $23 diffuser fins printed/shipped from Thingaverse. Not pictured, also installed a Damond OCC.

 

[jks16]

Added a bit of colour think it looks not too bad for having 2 left hands


Sent from my iPhone using Tapatalk

 

[jks16]

ive been thinking of getting the black with red trim model, but yours look good, bet its neat to see at night

Thanks it doesn't glow as I had hoped but still like it


Sent from my iPhone using Tapatalk

 

[M-Sport fan]

Thanks it doesn't glow as I had hoped but still like it


Sent from my iPhone using Tapatalk

Is the plasti-dip/paint on the lower grille glow in the dark?

 

[jks16]

The dip itself no but I did spray some glow on it and I think I gotta put more on as it doesn't glow so well right now


Sent from my iPhone using Tapatalk

 

[VirtualRonin]

I installed my MFactory LSD this weekend along with new engine/trans mounts from frankiefiesta. It was a big job but I did it completely on my own in a garage with the car on jack stands. I feel like I'm now able to take full advantage of the car's power! It should be interesting to see how the car performs at the next autocross later this month.

 

[worfab]

I installed my MFactory LSD this weekend along with new engine/trans mounts from frankiefiesta. It was a big job but I did it completely on my own in a garage with the car on jack stands. I feel like I'm now able to take full advantage of the car's power! It should be interesting to see how the car performs at the next autocross later this month.



View attachment 15036

View attachment 15037

View attachment 15038

Nice, this is on my list.

Sent from my SM-N920V using Tapatalk

 

[ron@whoosh]

I installed my MFactory LSD this weekend along with new engine/trans mounts from frankiefiesta. It was a big job but I did it completely on my own in a garage with the car on jack stands. I feel like I'm now able to take full advantage of the car's power! It should be interesting to see how the car performs at the next autocross later this month.



View attachment 15036

View attachment 15037

View attachment 15038

holy crap man, I'm impressed
kudos to you and thanks for sharing this