Velossa Tech Diffuser Fins - Fiesta ST

[VelossaTech]

Hello everyone.


Wanted to show you guys how these were coming along. So far the feedback is praise!

The kit will come with 5 perfectly contoured fins that are numbered and matched to their specific location. There will be an installation guide in color that will be downloadable. 3M tape will be pre-applied and alcohol wipes will be supplied for surface preparation.

And of course all the colors.

These are rough prototypes, the final revisions will be much more polished of course.


@stclub
[MENTION=3329]j2FiST[/MENTION]
[MENTION=4534]Noodles[/MENTION]
[MENTION=4282]Svensunn[/MENTION]
[MENTION=2614]Bonesaw[/MENTION]
[MENTION=4277]15Fist3rST[/MENTION]
[MENTION=879]D1JL[/MENTION]
[MENTION=4176]nickstewartroc[/MENTION]
[MENTION=2404]TrickSTer[/MENTION]
[MENTION=819]Flaco[/MENTION]
[MENTION=40]lessard.dcj[/MENTION]

Remember these are prototypes, the final revision will be smooth much sexier.

 

[lessard.dcj]

[MENTION=3407]VelossaTech[/MENTION] Very nice indeed!

 

[J2FoRS]

Looks good Dan. I was beginning to think you were neglecting the little brother of the ST family. I like these alot.

They'd look good great paired with some [MENTION=3407]VelossaTech[/MENTION] wing risers.

 

[LilPartyBox]

That's a good look. Sub'd for updates

 

[CanadianGuy]

I want!

 

[TUX15ST]

Looks better than i thought it would, how much will these be?

 

[Tex ST-AR]

How resistant to sun fading are printed plastics?

 

[Noodles]

This looks pretty damn awesome. Do you have any pics lower and more straight on the back?

Sent from the Canyon's Edge

 

[TUX15ST]

How much will these be? And is the tape strong enough to hold them in a spot that gets a ton of air flow?

 

[VelossaTech]

How resistant to sun fading are printed plastics?

They are made of ABS and the colored fins have a UV protective coating on them.

 

[Svensunn]

Sign me up, these look great!

 

[lynx1993]

I am definitely interested depending on cost and what the final version looks like!

 

[Bluedrank]

Add me to your list! I was one of the first replies in the other thread. I'm totally in

Can't decide if I want them in red on my black car or if I want to go black on black.

 

[CanadianGuy]

Add me to your list! I was one of the first replies in the other thread. I'm totally in

Can't decide if I want them in red on my black car or if I want to go black on black.

Could always get red and plastidip black. Personally I think i would not install the middle one. just the 2 an each side. Need to see them first.

 

[FreshST]

I need these in my life.


Sent from my iPhone using Tapatalk

 

[TUX15ST]

could always get red and plastidip black. Personally i think i would not install the middle one. Just the 2 an each side. Need to see them first.

was thinking the same thing, the middle one is too far down and looks weird, i would just like the 4 fins as well no middle

 

[Noodles]

Maybe the middle finger. Should be made into a rear fog lights or something. Might be a bit much though.

Sent from the Canyon's Edge

 

[VelossaTech]

Guys these are just prototypes. The middle fin is going to be the same level as the rest. This was just to test fitment and position.

 

[dross93ranger]

Love it.

 

[LilPartyBox]

Guys these are just prototypes. The middle fin is going to be the same level as the rest. This was just to test fitment and position.

I want my middle one longer so i can flip off all the losers as i blow their doors off