Undertray / Under Engine Cover Fit FiST?

[Snrub]

Would this undertray fit the FiST? Some of the semi-sketchy links suggest it might fit up to a 2017 Fiesta, but it also seems to be applicable for the 2008+ models... which doesn't seem as promising.

https://www.ebay.ca/itm/364027040933

Here's a Ford link. Seems to fit the n/a 1.6, how far off could it be?
https://shop.ford.co.uk/products/ford-fiesta-engine-compartment-splash-shield-2

 

[pixelzombie]

Seems to be for the UK version of the FiST.

 

[D1JL]

The only Ford FiST OEM under pan was made for the desal powered UK model.
It was made out of a fiber material like the rear inner fenders.
It can be made to fit a US car by adding a custom made bumper lip.
I know this because I had one.

 

[Snrub]

The only Ford FiST OEM under pan was made for the desal powered UK model.
It was made out of a fiber material like the rear inner fenders.
It can be made to fit a US car by adding a custom made bumper lip.
I know this because I had one.

View attachment 59408
View attachment 59409

Thanks for that info. Could you tell me more about what was needed to create your custom bumper lip?

You said you "had" one. Is there a reason you don't currently have one?

 

[D1JL]

Could you tell me more about what was needed to create your custom bumper lip?

Is there a reason you don't currently have one?

I sold the car.

 

[Snrub]

View attachment 59410

Any tips you can share on how you created the custom lip?

We're you happy with the undertray and your custom lip?

 

[D1JL]

Any tips you can share on how you created the custom lip?

The photos above should provide you the info needed to create the lip.
However, you will need to purchase and install the undertray first so you will have all the measurements required.
These other photos may also help.

 

[Fiestig]

@Snrub

Is there a reason you don't currently have one?

Me

 

[Snrub]

The photos above should provide you the info needed to create the lip.
However, you will need to purchase and install the undertray first so you will have all the measurements required.
These other photos may also help.

Thanks. What material did you select?

 

[Snrub]

@Snrub

Me

Do you have any feedback to share about the undertray or the custom bits?

 

[Fiestig]

Do you have any feedback to share about the undertray or the custom bits?

I have never had it on. Still sitting somewhere in never ending cavernous parts storage

 

[D1JL]

What material did you select?

I used 1/8" ABS.

 

[kaminari]

The only Ford FiST OEM under pan was made for the desal powered UK model.
It was made out of a fiber material like the rear inner fenders.
It can be made to fit a US car by adding a custom made bumper lip.
I know this because I had one.

View attachment 59408
View attachment 59409

Sorry to bother you, so if I understand, the cover in the photo fits without mods an EU Fiesta ST mk7, correct?

Mi dispiace per averti disturbato, quindi se ho capito, il paraspruzzi nella foto si adatta senza mod a una Fiesta ST mk7 dell'UE, giusto?