- Member ID
- #10705
- Messages
- 2
- Likes
- 0
Howdy.
Several months back my clutch, master, slave, and pedal assembly was replaced. However, ever since then the pedal itself is slow to return. It's not that big of an issue if I come off it a little slow, but if I release the clutch quickly it takes a while to return and makes a suction sound. I've been told before that I might need a new spring, or there might be air in the master cylinder. I have no idea how to bleed the thing and I haven't found much good information about the procedure online. What do you guys think the problem could be? Here's a youtube video showing the situation:
View: https://www.youtube.com/watch?v=gqNWm6_mnT4
Several months back my clutch, master, slave, and pedal assembly was replaced. However, ever since then the pedal itself is slow to return. It's not that big of an issue if I come off it a little slow, but if I release the clutch quickly it takes a while to return and makes a suction sound. I've been told before that I might need a new spring, or there might be air in the master cylinder. I have no idea how to bleed the thing and I haven't found much good information about the procedure online. What do you guys think the problem could be? Here's a youtube video showing the situation:
