- Member ID
- #6535
- Messages
- 46
- Likes
- 9
**Accepting trade offers for stock wheels with good tires**
AWR engine mounts - 95a
All 3 mounts have about 25k miles on them. These have the stiffest bushings available so they're loud, but AWR sells replacement bushings for about $20 per mount if you want softer. Shifting, throttle response, and even braking are improved with these mounts. I had to grind the corner of the passenger side mount to get it to fit but you can't see it once installed. Drivers side mount is two different colors because they sent me a new updated version of the bottom half of the mount and only had silver available.
$200 OBO, add $20 for shipping
PHOTOS ---> View: https://imgur.com/a/qcI3eUH
Weathertech window deflectors - front and rear
I have two sets of these available, one new and one used.
Brand new in sealed box, front and rear - $75
Used - free if you buy something else
The used set has one damaged rear deflector. The corner of the piece that goes in the window track broke off so I wouldn't trust it to hold with your window down, but if you keep that one rear window up it should be fine.
Timestamped photo attached to bottom of post
Kruise Sport smooth hatch filler panel
Super rare Kruise Sport filler panel for the Fiesta ST (installed pic for attention). Kruise Sport was a UK based company that went out of business around 2020-21. Whoosh was importing their parts for a while but there was a rather public falling out between them so I don't think many of these were sold in the US.
This is made from fiberglass with stainless steel inserts for mounting. The finish is gloss black gelcoat and it will need to be painted or vinyl wrapped as there are scratches/defects in the gelcoat. I had it vinyl wrapped and the scratches/defects did not show through.
There is a small crack where the hatch handle goes. I didn't notice the crack until removing the vinyl last week so I think it's still structurally sound. The mounting bolts are a bit rusty but are M6x1.0 thread and easily replaced. I believe these require modification to fit the factory backup camera.
Asking $200 picked up in Orange County, CA. I really don't want to ship this but will if nobody local is interested.
PHOTOS --> View: https://imgur.com/a/M47jg0s
Coolerworx short shifter
Purchased December 2022, I have put about 25k trouble free miles on it. Still works great and shifts are tight, no visible signs of wear. Comes with the replacement shifter cable end which I didn't use.
Asking $400 OBO, add $25 for shipping (PayPal friends and family only for online payment. Sorry, I get it, but I don't want to deal with all the tax stuff that comes with Goods and Services payments. I can provide references from here upon request.)
PHOTOS --> View: https://imgur.com/a/czdx6HA
CSi Style 32 mesh wheels - 15x7 4x108 +35
I know the sticker says 4x100 but I can assure you they are 4x108. I don't know much about the company other than they were made in the late 80's and early 90's, sold by TRD as aftermarket wheels for the MK3 Supra, and I've also seen them in BMW fitment.
These will need to be refurbished, as you can see. I started to strip one center and determined that's better left to the pros. If you send a wheel center to or accurate measurements to SRR Hardware they can customize their blank lips to fit, they can also change the offset or step them up to 16 or 17 inch diameter. The current lips would probably work but they don't look great. Lots of curb rash, dings, and a nice dent on one lip.
All hardware is accounted for and bagged. Needs to be polished up but should be okay. These wheels will require 63.7mm to 65.1mm hubcentric rings in order to mount.
I'd like to sell these locally (Orange / Los Angeles County) but would be willing to ship at the buyers expense.
$325 (local pick up in OC/LA)
PHOTOS --> View: https://imgur.com/a/fers6wb
AWR engine mounts - 95a
All 3 mounts have about 25k miles on them. These have the stiffest bushings available so they're loud, but AWR sells replacement bushings for about $20 per mount if you want softer. Shifting, throttle response, and even braking are improved with these mounts. I had to grind the corner of the passenger side mount to get it to fit but you can't see it once installed. Drivers side mount is two different colors because they sent me a new updated version of the bottom half of the mount and only had silver available.
$200 OBO, add $20 for shipping
PHOTOS ---> View: https://imgur.com/a/qcI3eUH
Weathertech window deflectors - front and rear
I have two sets of these available, one new and one used.
Brand new in sealed box, front and rear - $75
Used - free if you buy something else
The used set has one damaged rear deflector. The corner of the piece that goes in the window track broke off so I wouldn't trust it to hold with your window down, but if you keep that one rear window up it should be fine.
Timestamped photo attached to bottom of post
Kruise Sport smooth hatch filler panel
Super rare Kruise Sport filler panel for the Fiesta ST (installed pic for attention). Kruise Sport was a UK based company that went out of business around 2020-21. Whoosh was importing their parts for a while but there was a rather public falling out between them so I don't think many of these were sold in the US.
This is made from fiberglass with stainless steel inserts for mounting. The finish is gloss black gelcoat and it will need to be painted or vinyl wrapped as there are scratches/defects in the gelcoat. I had it vinyl wrapped and the scratches/defects did not show through.
There is a small crack where the hatch handle goes. I didn't notice the crack until removing the vinyl last week so I think it's still structurally sound. The mounting bolts are a bit rusty but are M6x1.0 thread and easily replaced. I believe these require modification to fit the factory backup camera.
Asking $200 picked up in Orange County, CA. I really don't want to ship this but will if nobody local is interested.
PHOTOS --> View: https://imgur.com/a/M47jg0s
Coolerworx short shifter
Purchased December 2022, I have put about 25k trouble free miles on it. Still works great and shifts are tight, no visible signs of wear. Comes with the replacement shifter cable end which I didn't use.
Asking $400 OBO, add $25 for shipping (PayPal friends and family only for online payment. Sorry, I get it, but I don't want to deal with all the tax stuff that comes with Goods and Services payments. I can provide references from here upon request.)
PHOTOS --> View: https://imgur.com/a/czdx6HA
CSi Style 32 mesh wheels - 15x7 4x108 +35
I know the sticker says 4x100 but I can assure you they are 4x108. I don't know much about the company other than they were made in the late 80's and early 90's, sold by TRD as aftermarket wheels for the MK3 Supra, and I've also seen them in BMW fitment.
These will need to be refurbished, as you can see. I started to strip one center and determined that's better left to the pros. If you send a wheel center to or accurate measurements to SRR Hardware they can customize their blank lips to fit, they can also change the offset or step them up to 16 or 17 inch diameter. The current lips would probably work but they don't look great. Lots of curb rash, dings, and a nice dent on one lip.
All hardware is accounted for and bagged. Needs to be polished up but should be okay. These wheels will require 63.7mm to 65.1mm hubcentric rings in order to mount.
I'd like to sell these locally (Orange / Los Angeles County) but would be willing to ship at the buyers expense.
$325 (local pick up in OC/LA)
PHOTOS --> View: https://imgur.com/a/fers6wb
Attachments
Last edited:
