Perrin WMI install PWI-2

[Mattpwr]

ah, that's where the yellow (arm) wire comes in I am guessing. I can either connect that directly to a 12v on ignition source or into an on/off switch that has a 12v on ignition connected to it. Makes sense now, thanks for the help

 

[Sourskittle]

ah, that's where the yellow (arm) wire comes in I am guessing. I can either connect that directly to a 12v on ignition source or into an on/off switch that has a 12v on ignition connected to it. Makes sense now, thanks for the help

Yes sir.
Also. Pick up a solenoid if you haven't already. Check valves are prob 85% for the cause of failure on meth systems. Solenoids are pretty cheap insurance.

 

[Mattpwr]

cheers, will look into the solenoid next week.

 

[Agostini]

help kit aem meth

guys, I need help, I'm trying to install my meth aem kit but I can not find where to insert the wires from the driver's cab to the engine. with respect to the previous question where I can get the solenoid and the suitche to turn the pump on and off .. I appreciate if you have a picture of this ... thanks to everyone for the collaboration