• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!


P0420 and new down pipe

Messages
417
Likes
514
Location
Indianapolis, IN, USA
#1
Hey all,

I’ve been getting code P0420 for a few months. Put new O2 sensors in and tried different catalytic cleaners, but to no avail. Just picked up a low mileage downpipe and plan to install it this weekend.

Anything else I should try before putting the car under the knife? And any ideas of other stuff I should address while I’m in there?
 


Attachments

TyphoonFiST

9000 Post Club
Premium Account
Messages
11,656
Likes
8,171
Location
Rich-fizzield
#3
Hey all,

I’ve been getting code P0420 for a few months. Put new O2 sensors in and tried different catalytic cleaners, but to no avail. Just picked up a low mileage downpipe and plan to install it this weekend.

Anything else I should try before putting the car under the knife? And any ideas of other stuff I should address while I’m in there?
Whoosh* End it all

https://whooshmotorsports.com/colle...ant-02-sensor-defouler-j-style-thread-on-bung

https://whooshmotorsports.com/colle...ee-defouler-fiesta-st-focus-st-rs-explorer-st

https://whooshmotorsports.com/colle...ung-w-restrictor-fittings-for-adjustable-flow
 


OP
tri-pedaler
Messages
417
Likes
514
Location
Indianapolis, IN, USA
Thread Starter #5
Messages
129
Likes
139
Location
Atlanta
#6
Had to use them on a different car, as the Vibrant models were just too big for the space, could not fit both those and the sensor. The J style is huge. So the Dorman was a workable, and cheap, alternative. They come in two sizes, the short version worked for my situation.

Working well so far on my other car with a catted DP. That said, the hole in them is about the same size as the medium Vibrant restrictor, so not clear how well they would work with a decat DP.
 


Messages
467
Likes
543
Location
Metro Detroit
#7
I am surprised Oreilly is actually selling De-Foulers, Because these are illegal under the EPA and they are really cracking down, just look at the millions that COBB had to pay out recently.

I will also note that the OEM Downpipe has features in it to form a standing wave vacuum impulse at the Turbocharger exhaust outlet. Truth is these are the best downpipes to use if you are using a stock turbo. Because that bit of tuning in the downpipe does speed the response of the turbo to the throttle and creates more mid range power in that torque hump before the turbo starts to run out of capacity.
 


Messages
129
Likes
139
Location
Atlanta
#8
all the major parts stores near my area appear to sell such things, branded as 'spark plug defoulers' - errm, yeah. Must a 'if you know, you know' thing?

Found them at Advance Auto, Autozone, etc. too.
 


OP
tri-pedaler
Messages
417
Likes
514
Location
Indianapolis, IN, USA
Thread Starter #9
I am surprised Oreilly is actually selling De-Foulers, Because these are illegal under the EPA and they are really cracking down, just look at the millions that COBB had to pay out recently.

I will also note that the OEM Downpipe has features in it to form a standing wave vacuum impulse at the Turbocharger exhaust outlet. Truth is these are the best downpipes to use if you are using a stock turbo. Because that bit of tuning in the downpipe does speed the response of the turbo to the throttle and creates more mid range power in that torque hump before the turbo starts to run out of capacity.
Yeah, I’ll be putting a new to me cat in this weekend. I noticed that the voltage is fluctuating between bank 1 sensors 1 and 2 similarly, so must be a bad cat.

WHY it went bad is another issue - maybe blow by and then oil poisoning? I hope to do a media blast on the head this winter and then put in a catch can. At 90k miles. IMG_7721.png
 


OP
tri-pedaler
Messages
417
Likes
514
Location
Indianapolis, IN, USA
Thread Starter #12
Well folks, got the dreaded turbo to dp bolt issues. Removed 2. The top one, number 3, made it halfway out and then would. not. budge.

From what I've read on old reddit posts, if I keep going I WILL snap it, and then I'll be up a crick.

I don't have time to remove and drill/retap the turbo atm, so I guess I'll patch it all back together for now. Then, it's going to be turbo out to retap, and put some quality studs in from Whoosh.

Christmas break is going to be FUN 🎄
 


OP
tri-pedaler
Messages
417
Likes
514
Location
Indianapolis, IN, USA
Thread Starter #13
Heyo, thinking of running one of these for the time being before coming back to the new cat project. Probably just putting a defouler on the downstream O2 sensor for the moment and hoping that does the trick for now...
 


OP
tri-pedaler
Messages
417
Likes
514
Location
Indianapolis, IN, USA
Thread Starter #14
I have the same going on at like 40k and thinking about picking up a whoosh catted downpipe if sale happens on black friday
just be careful removing the turbo/dp bolts. I've now read enough horror stories to know that this is a very, very common issue.

I proceeded slowly and soaked in pb blaster over night, used heat before even trying - and it still didn't work.

Only thing I'd do different is get the turbo flange red hot (rather than just up to temp), but be careful of any fuel lines. Good luck!
 




Top