Mishimoto J-Line
I've taken my 2016 ST back to stock so that means these mods need a new home. Everything will be shipped UPS, insured and packaged correctly. I didn't realize I needed the paper with user name and stuff until I already took the pics so I took a couple extras at the end with everything on the couch and the paper with date and user name. For pics of the intercooler installed you can check my thread on here or my Imgur page here: https://imgur.com/a/1GPEP
Mishimoto J-Line intercooler, black. I spray painted the ST logo on the front in red. Includes homemade brackets, four hose clamps, two red 2.5" silicone elbows and two aluminum joiner couplers with beads to prevent them popping off under boost. Basically everything you need to install this intercooler in a Fiesta ST. The brackets are a bit long and I had to trim the plastic shroud under the front end to allow the intercooler to fit, but you could put more washers on the brackets or modify/make your own if you wanted it to fit without cutting.
I had some questions about the intercooler brackets. The brackets I built do not screw into an existing mounting hole, you will have to drill 2 new holes in the bumper support to use my brackets. If you would rather use the factory mounting hole in the center of the bumper you should buy CMBuildz brackets from Whoosh or another vendor and use them. They also claim you don't have to cut the factory plastic trim whereas with mine I did have to cut out a section roughly the size of the bottom of the intercooler.
Price lowered again. Want this thing outta my living room. $220 shipped to the lower 48.
Finally here's pics with my username and the date, along with all the parts.
Contact me by private message or reply in this thread. I will not hold anything, first person to contact me has first chance at an item. Payment via Paypal. I will ship within a day of receiving payment and provide a tracking number.
I've taken my 2016 ST back to stock so that means these mods need a new home. Everything will be shipped UPS, insured and packaged correctly. I didn't realize I needed the paper with user name and stuff until I already took the pics so I took a couple extras at the end with everything on the couch and the paper with date and user name. For pics of the intercooler installed you can check my thread on here or my Imgur page here: https://imgur.com/a/1GPEP
Mishimoto J-Line intercooler, black. I spray painted the ST logo on the front in red. Includes homemade brackets, four hose clamps, two red 2.5" silicone elbows and two aluminum joiner couplers with beads to prevent them popping off under boost. Basically everything you need to install this intercooler in a Fiesta ST. The brackets are a bit long and I had to trim the plastic shroud under the front end to allow the intercooler to fit, but you could put more washers on the brackets or modify/make your own if you wanted it to fit without cutting.
I had some questions about the intercooler brackets. The brackets I built do not screw into an existing mounting hole, you will have to drill 2 new holes in the bumper support to use my brackets. If you would rather use the factory mounting hole in the center of the bumper you should buy CMBuildz brackets from Whoosh or another vendor and use them. They also claim you don't have to cut the factory plastic trim whereas with mine I did have to cut out a section roughly the size of the bottom of the intercooler.
Price lowered again. Want this thing outta my living room. $220 shipped to the lower 48.
Finally here's pics with my username and the date, along with all the parts.
Contact me by private message or reply in this thread. I will not hold anything, first person to contact me has first chance at an item. Payment via Paypal. I will ship within a day of receiving payment and provide a tracking number.
Last edited:
![[scratch]](/images/smilies/icon_smile_headscratch.gif "Head Scratch [scratch]"){kind=icon}
