Issues while doing Transmission rebuild...

[ThatMilwaukeeFanboy]

Doing a transmission rebuild on my 2016 carbon syncros all the bearings and whatnot, ended up getting pretty much all new gears on the output shaft, a couple new syncro hubs, any idea wtf is going on with my gears clashing?

 

[Nitelife]

It's been years since I've had a transmission cracked open and not for the FiST platform. Maybe this website can help: http://blog.sluggyjunx.com/rebuilding-the-transmission-in-my-2014-ford-fiesta-st/

 

[ThatMilwaukeeFanboy]

It's been years since I've had a transmission cracked open and not for the FiST platform. Maybe this website can help: http://blog.sluggyjunx.com/rebuilding-the-transmission-in-my-2014-ford-fiesta-st/

He has helped me out a ton so far honestly! This just seems to be somewhat of an odd issue

 

[foodtruck]

Bearing under the shaft on the right hasn't fully seated or something? The gear on the right here seems to be higher than it should be so to me it means its not something in the middle of the stack..

 

[ThatMilwaukeeFanboy]

 

[ThatMilwaukeeFanboy]

I thought the same! I drove the output shaft case bearing on top of the new yellow funnel and I can't move the funnel anymore so I figured it was seated....input shaft case bearing I can visually see is bottomed out on the case 😭

Bearing under the shaft on the right hasn't fully seated or something? The gear on the right here seems to be higher than it should be so to me it means its not something in the middle of the stack..
View attachment 64586

 

[ThatMilwaukeeFanboy]

More pics

 

[foodtruck]

Btw, is this just the photo or is there ominous glitter? I see what looks like metal shavings on gear teeth as well