Hijinx’ Build

[Hijinx]

Ok, ladies and germs, I know you all like data, so here's some. I wasn't aware you can trim the data like vDyno actually does so I'll do that in future.



This datazap is of the base tune run, where I started much lower in rpm.



This one here is started at 3.5krpm.

 

[Hijinx]

Trimmed log of the first revision.

Trimmed log of the base tune.

You can see that the DHM Race cooler does work!

 

[FearTheSnail]

How many revisions in is that vdyno? What kind of gas?

 

[Hijinx]

How many revisions in is that vdyno? What kind of gas?

The vDyno is base tune and one revision. I'm on 93 Oct. Shell nitro+.

 

[FearTheSnail]

The vDyno is base tune and one revision. I'm on 93 Oct. Shell nitro+.

Can't to see the final revision of the tune.

 

[Hijinx]

Ooook... So... I was concerned about my spool time so I started chatting with [MENTION=1098]drag4life723[/MENTION]. He had me strap a rubber glove to my dump and lo and behold it blew right off. This meant that my wastegate wasn't closed. I sent him pics of my pre-install and he says, "the valve seat goes under." So... I start scratching my head and think to myself..."oh damn, let me check the packaging." Sure enough, there the valve seat was... -_- I was so embarrassed that I couldn't help but to laugh at myself. Moral of the story, people: Don't be Hijinx. Loaded my base tune up again, and here are the results:

http://datazap.me/u/hijinx/gtx2867r-base?log=0&data=4-5-7-14&trim=1&tmin=100.00&tmax=100.00

http://datazap.me/u/hijinx/gtx2867r-base-slot-2?log=0&data=4-5-7-14&trim=1&tmin=100.00&tmax=100.00

 

[Sourskittle]

Lol. I like how the fuel just checks out on you at 6500+ rpm, lol. I think this pretty much answers our questions about what the stock fuel system can do on normal gas, lol.

I almost wish they built that valve seat into the wastegates, lol.

 

[Hijinx]

Shifter goodies to be installed:

Mountune Quick Shift
Boomba Shifter Base and Bracket bushings

My waking time is limited before I head off to Focus Fest so they'll have to wait.

 

[Hijinx]

93 octane, revisions 1 and 2. [MENTION=1098]drag4life723[/MENTION] is a mad genius, in my opinion.

 

[dyn085]

93 octane, revisions 1 and 2. [MENTION=1098]drag4life723[/MENTION] is a mad genius, in my opinion.

View attachment 6468

:impress:

 

[Hijinx]

In case anyone misses it, the second revision is the same average power level while commanding for 2 LESS lbs of boost.

 

[J2FoRS]

Great numbers! Can't wait to get all my parts in order and get a pro tune. Thanks for posting the data!

PS everytime I see your name I cry a little inside that I didn't buy your Cobb FMIC. Lol

Great build!

 

[koozy]

93 octane, revisions 1 and 2. [MENTION=1098]drag4life723[/MENTION] is a mad genius, in my opinion.

View attachment 6468

these numbers look way better than your first set. I guess Panda couldn't whip up a tune that Russ/DHM could. Great job. Those wanting a tune should take note, LOL

 

[Hijinx]

Great numbers! Can't wait to get all my parts in order and get a pro tune. Thanks for posting the data!

PS everytime I see your name I cry a little inside that I didn't buy your Cobb FMIC. Lol

Great build!

Thanks! And sorry *hug*

View attachment 6468

these numbers look way better than your first set. I guess Panda couldn't whip up a tune that Russ/DHM could. Great job. Those wanting a tune should take note, LOL

Given enough time, they could put their Panda spin on it. But, those guys have got a lot on their plate and I wanted the car tuned before the cold weather set in. Who other than Russ could tune it the absolute best within any given time frame? No one.

 

[Sourskittle]

I really want Russ to tune one of my cars, lol. I just can't afford him, lol. Its not that's he's expensive, its just I'm so mod-money-poor,
{gets back to editing his "go fund me" page for mods}

 

[koozy]

Given enough time, they could put their Panda spin on it. But, those guys have got a lot on their plate and I wanted the car tuned before the cold weather set in. Who other than Russ could tune it the absolute best within any given time frame? No one.

I agree, not sure why you didn't go with Russ to begin with since it's his kit and he has a vested interest to produce great results, and the results show.

 

[Hijinx]

I agree, not sure why you didn't go with Russ to begin with since it's his kit and he has a vested interest to produce great results, and the results show.

DHM and Panda have a relationship. I got my kit through Panda, as I do with the majority of my parts since I'm local to them, so I have a relationship with them as well. They've tuned me since Stage 1, almost a year ago to the Cyborg I had. Tuning was included, and since I have that relationship and they wanted a crack at it, I figured why not let them have another 300whp Fiesta under the belt. The timing was just unfortunate.

 

[DHM1]

I just realized Our 4 cars at foucs fest will be over 1500whp combined!!!!! You, [MENTION=9]rodmoe[/MENTION], [MENTION=2468]MrsDHM[/MENTION] and myself!

Cant wait

 

[Hijinx]

I just realized Our 4 cars at foucs fest will be over 1500whp combined!!!!! You, [MENTION=9]rodmoe[/MENTION], [MENTION=2468]MrsDHM[/MENTION] and myself!

Cant wait

It's going to be so, so awesome!! I gotta get the car cleaned up tomorrow! Hopefully, Panda gets my ceramic Hawk pads in before I have to leave, so my wheels stay sort of clean. Should be today.

 

[pelotonracer2]

It's going to be so, so awesome!! I gotta get the car cleaned up tomorrow! Hopefully, Panda gets my ceramic Hawk pads in before I have to leave, so my wheels stay sort of clean. Should be today.

I'll be there first thing Saturday morning. I want to see some drag racing. lolz