Clunky shifts even after installing AWR mounts?

[Bokket]

Hey guys, I just finished installing the full set of AWR polyeurethane mounts I bought from Whoosh.

I got the 70a duro, install was pretty straightforward.

For the first few days, my shifts were completely free of clunks but starting yesterday I started noticing clunky shifts again, along with a bit of bucking in first gear.

Is this part of the break-in process? Do I need to retorque the mounts?

Thanks everyone!

 

[Stubborn Approach]

Check the torque on the mounts.

 

[Bokket]

Check the torque on the mounts.

The torque on the bushings themselves? Or where they mount to the car/motor?

Follow up; is it normal to have to retorque the mounts after install?

Thanks!

 

[Stubborn Approach]

The torque on the bushings themselves? Or where they mount to the car/motor?

Follow up; is it normal to have to retorque the mounts after install?

Thanks!

Both

It is common practice to check the torque on the mount bolts every oil change.

 

[Bokket]

Both

It is common practice to check the torque on the mount bolts every oil change.

Righto, thank you!

 

[Sam4]

This is good info, a basic 101 on bushings and mounts.

View: https://www.youtube.com/watch?v=8Ex0dGojHZI