ARMASpeed USA PRESENT : Double Sided Vacuum Sealed Carbon Fiber Intake Kit

[ARMASPEEDUSA]

ARMASPEED USA is proud to introduce FiestST Members with our Sport Carbon Fiber Intake!!

ARMASpeed's Carbon Fiber Intakes utilize a unique vacuum process that molds a true Double Sided Carbon Fiber Finish. The Highest Grade of UV Protected Clear Coat is later applied with YOUR Choice of a Matte or Gloss Finish at NO Additional Charge!!

The ARMASpeed Carbon Fiber Intake Box not only enhances the look of engine compartment, but it also isolates the engine's hot air away from the intake manifold. From our break-through carbon fiber pipe manufacturing process to our air duct design, our intakes are 100% designed in house with many hours of R&D to ensure to the best performance increase and also a 100% Bolt On Design with no modifications needed. All ARMASpeed Carbon Fiber intakes comes with their own Hyper Flow Filter. Replacement filter can be purchase from any of the ARMASpeed Dealers. Each application is Dyno-Tested and have shown proven gains of an average power increase by 5%~15%!!

ARMA Speed Carbon Fiber Sport Intakes are designed simplistic intakes for various entry level cars. The vacuum formed carbon fiber induction chamber collects air while guiding it into the air induction pipes and into the engine.

Key Features:

• Approx +4hp/ 3Nm (peak output)
• For Years 2013-2015
• Direct Bolt On Design Without Any Modification Needed
• No Remapping of ECU/DME Needed
• Unique Vacuum Process with a Smooth Surface and Clear Carbon Fiber Pattern Inside and Out
• Air Flow Guide Design is Made to Minimize Turbulence Inside the Air Box

Fiesta ST ARMASpeed Carbon Fiber Intake

FIESTA ST INSTALLED PICTURES:

Fiesta ST ARMASpeed Carbon Fiber Intake MATTE FINISH ON MY 2016

SHORT VIDEO ------> CLICK HERE TO VIEW



FIESTA 1.0 INSTALLED PICTURES

We at ARMASpeed USA are here to help and service our North American customers with a faster response time and shorter shipping transit times. Most intakes are in stock and ready to ship from our Pomona, California Distribution Center. All in stock items will ship out within 1 business day via Fedex Ground or USPS, depending on its destination. Special order items should be expected to be shipped out from our warehouse location within 10-15 Business Days.

Questions or Concerns?
Feel Free to PM / Email / Call Anytime!

READY TO PURCHASE THE BEST LOOKING CARBON FIBER INTAKE ON THE MARKET?
PM ME FOR SPECIAL PROMO CODE EXCLUSIVELY FOR OUR FIESTA ST MEMBERS​

 

[F1Fletch]

2016 Version? Pleeez

 

[Wimp Lo]

That is interesting, do you make one for an ST?

The pictures look like a 1.0.

 

[nickstewartroc]

Looking at this, it should fit a 2016 since it doesn't replace the pipe with the nipple

 

[ARMASPEEDUSA]

That is interesting, do you make one for an ST?

The pictures look like a 1.0.

You're correct, we have both version available !

 

[ARMASPEEDUSA]

Looking at this, it should fit a 2016 since it doesn't replace the pipe with the nipple

2016 Version? Pleeez

Yup, looks like it will fit the 2016 as well, just need to test fit one on the 2016 before we confirm on the application.

 

[Hijinx]

You're correct, we have both version available !

You have two versions? Or it fits both cars?

 

[ARMASPEEDUSA]

You have two versions? Or it fits both cars?

I have two versions of this intake. One for ST and one for 1.0 . Both versions can be order in gloss or matte carbon fiber at no additional charge

 

[Hijinx]

I have two versions of this intake. One for ST and one for 1.0 . Both versions can be order in gloss or matte carbon fiber at no additional charge

Any pictures of one installed on the ST?

 

[F1Fletch]

Funny after looking again, Inthink your right
Good catch !

 

[F1Fletch]

Funny after looking again, Inthink your right
Good catch !

 

[ARMASPEEDUSA]

All pm replied

 

[15pbfist]

can we see a pic of the intake for the 1.6 st motor

 

[Bluedrank]

You really need to post pictures for the ST model, instead of this 1.0L in the announcement post. At best that's shady. Edit the post and show pictures for the ST, you know, considering the fact that you're posting on the fiestaSTforum. This isn't a general forum for all fiestas, just one type.

 

[ARMASPEEDUSA]

I apologize for the late reply, we are working with local ST owner and will be providing photo shortly. thank you for the interests everyone

 

[Levi1.0]

Ooo... I'm happy you posted a pic of the 1.0. I'm interested. Haha. I hang out on this site (mostly in the aerodynamic threads) because I think I got banned on the only site that discusses the 1.0 because I tried to do something other than complain...

...anyways, I'll be following you guys to see what else you come out with for the 1.0.

 

[ARMASPEEDUSA]

Bump!

 

[15pbfist]

Bump for pics of the intake it's quite comical at this point

 

[DP03]

This looks to be just the box and the small elbow going into it? This doesn't include piping all the way to the turbo like other intakes??

 

[Levi1.0]

From the research I've done, the 1.0 and the ST airbox are identical. So if the ST version of this intake doesn't include any extra piping, it'll look identical in your ST's.