-
Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!
shouldbeasy's 'not a build' build.
- Thread starter shouldbeasy
- Start date
OP
Thread Starter
#89
Thread Starter
#89
Few more pictures of my skid plate - now installed! (it's still missing one bolt per side but hey, it's on!)
The keen eyed will also note that I covered the middle section of the front 'lip' in black vinyl (3M Matte Black) and I do have aspirations to paint the intercooler... that may or may no happen!
And a few of the ride cleaned up
The keen eyed will also note that I covered the middle section of the front 'lip' in black vinyl (3M Matte Black) and I do have aspirations to paint the intercooler... that may or may no happen!
And a few of the ride cleaned up
Few more pictures of my skid plate - now installed! (it's still missing one bolt per side but hey, it's on!)
The keen eyed will also note that I covered the middle section of the front 'lip' in black vinyl (3M Matte Black) and I do have aspirations to paint the intercooler... that may or may no happen!
And a few of the ride cleaned up
The keen eyed will also note that I covered the middle section of the front 'lip' in black vinyl (3M Matte Black) and I do have aspirations to paint the intercooler... that may or may no happen!
And a few of the ride cleaned up
![[twothumb]](/images/smilies/icon_smile_twothumbs.gif "Two Thumbs [twothumb]"){kind=icon}
Would it be feasible to make up a real, functional, splitter (NOT just an aesthetic 'lip') which attaches to that skid plate via threaded holes, so that it can be easily removed (and then re-installed) for winter/'rallycross' type use, if you so desired?
OP
Thread Starter
#93
Thread Starter
#93
N-I-C-E!!!
Would it be feasible to make up a real, functional, splitter (NOT just an aesthetic 'lip') which attaches to that skid plate via threaded holes, so that it can be easily removed (and then re-installed) for winter/'rallycross' type use, if you so desired?
Would it be feasible to make up a real, functional, splitter (NOT just an aesthetic 'lip') which attaches to that skid plate via threaded holes, so that it can be easily removed (and then re-installed) for winter/'rallycross' type use, if you so desired?
And your splitter idea is a great one! I have some aluminum still so I may look in to making one! I'm not 100% sold on exterior mods yet (other than colour changes) and so if I cross that bridge I may end up opening up a can of worms...
Are you going to run those 225/45s-17s at a lowered ride height from stock?
IF so, then let us know how badly they rub anywhere, and what you had to do to fix that.
I wanted to run that same size, but at 25" tall, I did not want to chance it, especially with one of the wide tread width versions I would want to use (the few 235/40-17s out there are a good deal shorter than these, but I thought their width would rub EVERYWHERE, and they're not ideal on an 8" wide wheel).
IF so, then let us know how badly they rub anywhere, and what you had to do to fix that.
I wanted to run that same size, but at 25" tall, I did not want to chance it, especially with one of the wide tread width versions I would want to use (the few 235/40-17s out there are a good deal shorter than these, but I thought their width would rub EVERYWHERE, and they're not ideal on an 8" wide wheel).
![[thumb]](/images/smilies/icon_smile_thumb.gif "Thumbs Up [thumb]"){kind=icon}
