Fiesta ST Exhaust Thread

[stuntdoogie]

Still loving my CP-E cat back. Everyone who rides in my car loves it too. I'm usually not a fan of loud exhausts on 4 cylinder engines, but it sounds bad ass and shoots a nice backfire once in awhile. I gotta do a night pull with the GoPro on my rear bumper one of these days.

Please do!

 

[FistSt215]

Not sure on the DP, but I want to find more details on that catback and when it might be available.

Hey for some reason I can't see your post that I got in my email for the Tsudo GB. If it's 340 shipped I be interested . I was gonna wait till the fall to grab it at 380. But at 340 can't beat it . I also need a IC lol. Want the JLine but want to wait what depo racing has to offered . I also need a rmm too lol I'm a messed haha got a baby coming and have to sneak these parts on the credit card somehow haha

 

[SeanBonham]

There was some confusion with the rep. $380 is the first batch price. It might go up from there. No group buy right now. The $340 I was told was a mistake on their part.


Sent from my iPhone using Tapatalk

 

[FistSt215]

Well 380 is a good price for cbe. I just want to know if it's a 70 or 76mm. Their site says 70 but the video of sound clip on YouTube says 76mm.

 

[SeanBonham]

Well 380 is a good price for cbe. I just want to know if it's a 70 or 76mm. Their site says 70 but the video of sound clip on YouTube says 76mm.

I contacted semotors on facebook and they responded quickly. https://www.facebook.com/semotors/
They were helpful and I bet could answer your question.

 

[SeanBonham]

Well 380 is a good price for cbe. I just want to know if it's a 70 or 76mm. Their site says 70 but the video of sound clip on YouTube says 76mm.

From FB "We were gonna go 3" but 2.75 is a better size for you guys" so it is 2.75.

 

[FistSt215]

From FB "We were gonna go 3" but 2.75 is a better size for you guys" so it is 2.75.

Ok c cool I hope a dp will be able to bolt up to it . Don't think any complany makes a 70mm dp

 

[Wesdawg]

Looking forward to seeing /hearing your review. How soon until you install

 

[Wesdawg]

I ordered the FSWerks exhaust on Black Friday and won't be installing it until Spring, so I did an unboxing review video of the system
[video=youtube;bmLigZ_1xwM]https://www.youtube.com/watch?v=bmLigZ_1xwM[/video]

While it isn't as polished as the Cobb or Mountune, you can take multiple grades of sandpaper and polish to get it really polished. The more effort you put into it, the more polished it will be. I did have an issue with my exhaust out of the box, and FSWerks took care of it right away. The tip to muffler connection didn't fit properly due to the tip being D shaped. They sent me a new tip and I sent the other one back. I expect another month before I can get it installed on the car and get some install, sound, and installed review videos.

Apologies, trying to figure out the responses... I was responding to this video

 

[wireless]

Still loving my CP-E cat back. Everyone who rides in my car loves it too. I'm usually not a fan of loud exhausts on 4 cylinder engines, but it sounds bad ass and shoots a nice backfire once in awhile. I gotta do a night pull with the GoPro on my rear bumper one of these days.

Please do!

I just installed my CP-E Nexus catback on my '16 on Tuesday. Thursday morning now & I love it.

Inside the car it's quite... quiet. I can hear some burbles, not much (if any) turbo noise through the exhaust. Buddy told me it sounds great.

I haven't heard it from outside the car yet, but I'll take a video this morning and see if I can get it uploaded. I can do some gopro stuffs as well if desired, but I don't have an external mic for one lol

 

[TheStig]

I believe im going to just have a system built. 3" downpipe back with a center section that can be removed for a resonator in case i determine its too loud. Found the exact muffler I want for a turned down pie-cut tip.

http://k-tuned.3dcartstores.com/Turndown-Muffler_p_361.html

 

[MS67]

That's going to be loud as shit. I would at least add a vibrant ultra quiet resonator to it.

 

[TheStig]

That's going to be loud as shit. I would at least add a vibrant ultra quiet resonator to it.

I had a B16 swapped civic with a straight exhaust, granted that was years ago, but I loved it. I also did mention I plan to have an option to add a resonator if its too loud.

It likely will be, but I want to hear it without one first.

 

[haste]

I believe im going to just have a system built. 3" downpipe back with a center section that can be removed for a resonator in case i determine its too loud. Found the exact muffler I want for a turned down pie-cut tip.

http://k-tuned.3dcartstores.com/Turndown-Muffler_p_361.html

Love that exhaust tip. I'm looking forward to seeing it on the car!

 

[IconST]

Hey guys came across this today! I know it looks as its for a non ST model but looks as if its the same for our ST
Has any one gave this a try i mean for the price and quality it looks like a good deal.

https://www.ebay.com/ulk/itm/152024367730

 

[KKaWing]

The tips look like it would hang really low.

 

[IconST]

The tips look like it would hang really low.

But if you notice we have a cut out for the muffler as that one doesn't so im assuming it will even out.
I could be wrong tho

 

[MS67]

The tips are 2.75", the piping itself is 2.25" - look at the pics.

 

[madfiesta14]

I believe im going to just have a system built. 3" downpipe back with a center section that can be removed for a resonator in case i determine its too loud. Found the exact muffler I want for a turned down pie-cut tip.

http://k-tuned.3dcartstores.com/Turndown-Muffler_p_361.html

Yeah that K tuned turndown with A Vibrant 1793 18" resonator would be sweet. K tuned 170ish and Vibrant 70ish on Amazon. maybe 200 in mandrel bend and welding?

 

[madfiesta14]

Yeah that K tuned turndown with A Vibrant 1793 18" resonator would be sweet. K tuned 170ish and Vibrant 70ish on Amazon. maybe 200 in mandrel bend and welding?

Im gonna look into it.