New intercooler and boost levels

[Ghostwhite]

Yeah Injen intake makes darth vader sounds

 

[re-rx7]

Thecar will only produce as much boost as needed to hit its tq target.

 

[razorlab]

Thecar will only produce as much boost as needed to hit its tq target.

Unless the torque target is unreachable by base WGDC+Compensations+ErrorCorrections.

Then it would just produce as much boost as that allows.

 

[iso100]

Thecar will only produce as much boost as needed to hit its tq target.

Yep.

 

[re-rx7]

Yep.

He should be happy. BAsically means the car is making more power with less strain.

 

[Tylo60]

Unless the torque target is unreachable by base WGDC+Compensations+ErrorCorrections.

Then it would just produce as much boost as that allows.

Now I'm Lost and scared, that doesn't sound good?

 

[re-rx7]

Now I'm Lost and scared, that doesn't sound good?

You are fine dude. What Razorlab is talking about is very very unlikey to happen.

 

[razorlab]

Yes. What I was describing isn't necessarily a bad thing if that's the strategy being used.

Plus it's always better to undershoot than overshoot.

 

[Tylo60]

Yes. What I was describing isn't necessarily a bad thing if that's the strategy being used.

Plus it's always better to undershoot than overshoot.

I do notice that when charge temps are lower I will get up to 19.5 psi. But I live in south Florida and it's still 90* here. I have a 2j race downpipe coming tomorrow, see how much of a difference it makes!

 

[Kip2MyLou]

So before I go buying all these mods for my car, is something that's common or doesn't happen really that often? I plan on going stage 2 in the spring and would like to know what I'm getting myself into before hand.

 

[re-rx7]

So before I go buying all these mods for my car, is something that's common or doesn't happen really that often? I plan on going stage 2 in the spring and would like to know what I'm getting myself into before hand.

Damnt razorlab! You will be fine. Canned tunes are all the same. Just make sure you button down the hose clamps.

 

[Kip2MyLou]

I'll be having my mechanic install it I trust him to do everything properly. And I was just asking. I always like to ask just to make sure.

 

[re-rx7]

I'll be having my mechanic install it I trust him to do everything properly. And I was just asking. I always like to ask just to make sure.

I hear you. I will be installing my Cobb FMIC tomorrow. I will post up my findings. I dont rely on boost numbers to tell me whats going on.

 

[Kip2MyLou]

I hear you. I will be installing my Cobb FMIC tomorrow. I will post up my findings. I dont rely on boost numbers to tell me whats going on.

Sounds good. Post them in this thread if you don't mind. I'd like to see those.

 

[dyn085]

Put your car in third gear and go WOT at around 1700 rpm. You should see max boost before 3200 rpm and still within most speed limits.

 

[razorlab]

Damnt razorlab!

What the heck did I do?

 

[Tylo60]

So installed my downpipe today
Cobb is showing two codes
Ecu. And
Po18d...

Help!

 

[koozy]

So installed my downpipe today
Cobb is showing two codes
Ecu. And
Po18d...

Help!

do you have an Accesport? and if you do what map is loaded? The Cobb Stage 3 map is designed to accommodate the downpipe.

 

[Tylo60]

do you have an Accesport? and if you do what map is loaded? The Cobb Stage 3 map is designed to accommodate the downpipe.

No more codes. I forgot to plug a sensor back in lol thank you

 

[airjor13]

So installed my downpipe today
Cobb is showing two codes
Ecu. And
Po18d...

Help!

just kidding! Glad you plugged the sensor back in