CLOSED: Cyborg TurboCharger * NOT AVAILABLE *

[JasonHaven]

If this is generally an accurate comparison between a cyborg and a stock turbo, I might have to invest in this down the line. I like that it's pretty similar down low, but has more gains up top!

 

[Siestarider]

I believe it a fair representation of Cobb S3 vs cyborg, but SS is always playing with fuels and hauling who knows what when he logs. Plus he tunes his own, but claims to not be a tuner. I do not even remember why I downloaded that particular cyborg log, it was a while ago. Probably an E30 log, I was trying to work one up for my car with Panda but failed to get anywhere in that effort.

I am going to this, it probably will not stop GTR's from kicking sand in my face on straights, but it should enable me to pull away from those pesky BMW's.

 

[JasonHaven]

I'm not looking for any specific big numbers myself, but I do have an interest in holding/gaining power in the top end, vs dying off. It'll be interesting to see what my results are with Adam's IWG, since that seems to be going part of the way already.

 

[Young L]

I am going to this, it probably will not stop GTR's from kicking sand in my face on straights, but it should enable me to pull away from those pesky BMW's.

BMW's aren't so much my problem, more like guys in cars like these....

 

[F-35 ST]

that moment you realize that the other "silver fiesta" that people always say is me driving around... is actually mr.skittle himself. you sneaky bastard only living a few miles away from me

 

[Sourskittle]

that moment you realize that the other "silver fiesta" that people always say is me driving around... is actually mr.skittle himself. you sneaky bastard only living a few miles away from me

You live around crews lake?
I'm around, and normally pretty loud.

 

[F-35 ST]

You live around crews lake?
I'm around, and normally pretty loud.

well its like 25 -30 minutes from me. but i still have people ask, because i also dipped my wheels gray. lol

 

[Sourskittle]

Go two wheels without using wheel cleaner. Semi-instant grey wheels, lol.

 

[Dustys318]

I'm not looking for any specific big numbers myself, but I do have an interest in holding/gaining power in the top end, vs dying off. It'll be interesting to see what my results are with Adam's IWG, since that seems to be going part of the way already.

If you get the cyborg have Sourskittles put the bigger "flapper" on the wastegate using Adam's wastegate diaphragm and E30 (if E85 is available to you) tune. You should get about the same 250-260whp and 275-285wtq with cool, sea level air. I would chirp 3rd gear here in El Paso, TX (4500ft) but my recent trip to Corpus Christi, TX (sea level) I was spinning 3rd...

 

[JasonHaven]

If you get the cyborg have Sourskittles put the bigger "flapper" on the wastegate using Adam's wastegate diaphragm and E30 (if E85 is available to you) tune. You should get about the same 250-260whp and 275-285wtq with cool, sea level air. I would chirp 3rd gear here in El Paso, TX (4500ft) but my recent trip to Corpus Christi, TX (sea level) I was spinning 3rd...

I plan on exclusively running a 93 or 91 tune, I'm much too lazy trying to find the fancy fuel for mixing haha

 

[Sourskittle]

I plan on exclusively running a 93 or 91 tune, I'm much too lazy trying to find the fancy fuel for mixing haha

That's all I've got to say about that

 

[Sourskittle]

Just wanted to say thank you to all the guys I've been working with lately. Lucky to be busy.

 

[badltinhelp]

Keep up the great work man! Can't wait to see your special project when it's done !

 

[Sourskittle]

 

[Sourskittle]

More to come later today.
Siesta riders setup is ready for final assembly now that I have the inlet.

Bad help setup needs some final touches and the manifold gasket I just got today port matched and "other stuff"

Frankefiesta turbine housing is almost done, just have to weld the wastegate arm back on after porting. His manifold bracing was stalled because the welder ran out of Argon, we're on it. And of course, I got to get him my turbo off my car.

Joser is next on deck

 

[frankiefiesta]

Awesome glad to see more people going this route

 

[Tune+]

I see a lot of cars I need to tune in the future...

 

[badltinhelp]

yess! inlets came in early and seems christmas is gonna come early for me also LOL

 

[badltinhelp]

I see a lot of cars I need to tune in the future...

you will be hearing from me not too far in the distant future

 

[Sourskittle]

Manifold/turbine wrap vs inlet/intake wrap.