-
Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!
Fiesta ST Intake Thread
- Thread starter MKVIIST
- Start date
- Tags fiesta fiesta st fiesta st cold air intake fiesta st intake fiesta st intake system fiesta st mountune ford mountune intake wheels
New Intake Poll Thread created
For those that have upgraded their intake systems please take a moment and select your intake in the poll below..
Which Intake upgrade do you currently have installed?
thanks!
For those that have upgraded their intake systems please take a moment and select your intake in the poll below..
Which Intake upgrade do you currently have installed?
thanks!
Just did this small project this evening. It was a fun little exercise. Doing the entire lower section and front tube took roughly 1 roll of this heat reflective tape - http://amzn.to/2jxjASf. I was almost out of tape so I decided not to do the top box, although I might grab another roll later on to do that.
Looks pretty neat but heat soak on the ABS is pretty much nonexistent anyway. Now on my CP-E metal piping and box that's another story.
Of course, when you're at operating RPM and under load the air doesn't spend enough time in the piping to increase in temp much due to convection anyway... so the CAT and intake temps you see that are high when stopped or idling are only because of soak combined with low flow.
Of course, when you're at operating RPM and under load the air doesn't spend enough time in the piping to increase in temp much due to convection anyway... so the CAT and intake temps you see that are high when stopped or idling are only because of soak combined with low flow.
No way I'd go with the injen ecspecially for the 16 the price is crazy for basically just a filter. Too much hot air under these hoods for an Intake like that. Between those two the mishi for sure. You could get the adapter from map or swoosh and use any of the previous intakes whIch is what I'm gonna do. I'm between the 2jr the Cobb and cpe . I'm settled on the 2jr just concerned about noise lol. I love noise but from what I hear this might be insane...
Hey Guys,
The COBB intake is FINALLY available for the 2016+ cars. Thanks for being so patient. It comes with the adapter and hosing which allows you to retain all the factory functionality and keep things happy. More details can be found here.
Also, if you have a 2016+ but already have the intake, the adapter you need can be purchased separately.
Kyle@COBB
The COBB intake is FINALLY available for the 2016+ cars. Thanks for being so patient. It comes with the adapter and hosing which allows you to retain all the factory functionality and keep things happy. More details can be found here.
Also, if you have a 2016+ but already have the intake, the adapter you need can be purchased separately.
Kyle@COBB
I guess you'd just have to call them and see where they do all of the test fitting and stuff. And I believe you won't have to pay for the intake system if you donate your vehicle. But I might just purchase the 14-15 intake and purchase the adapter from Whoosh. If you would be able to donate your FiST them I might just wait! I want to be able to go back to stock if I ever need to and the Whoosh adapter would make me able to do so though.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Sent from my SAMSUNG-SM-G920A using Tapatalk
http://www.knfilters.com/air_intake/ford_fiesta_st.aspx
it looks as if they already have an intake for us
it looks as if they already have an intake for us
so i got a response,
"Thank you for contacting K&N. It is difficult to say when or if we will make one as it depends on the demand for the product. If there is a demand and R&D would like to develop one then you will see your car appear on the list below. If you see your vehicle on that list in the future then fill out the form and you will be contacted by a K&N representative."
http://www.knfilters.com/search/vehicle.aspx?V=C
so check that list repeatedly and if they ever want to make one for the 16 Fiesta ST it will be listed on that page and we can apply then but ill probably be out of cali by then
"Thank you for contacting K&N. It is difficult to say when or if we will make one as it depends on the demand for the product. If there is a demand and R&D would like to develop one then you will see your car appear on the list below. If you see your vehicle on that list in the future then fill out the form and you will be contacted by a K&N representative."
http://www.knfilters.com/search/vehicle.aspx?V=C
so check that list repeatedly and if they ever want to make one for the 16 Fiesta ST it will be listed on that page and we can apply then but ill probably be out of cali by then
just did this small project this evening. It was a fun little exercise. Doing the entire lower section and front tube took roughly 1 roll of this heat reflective tape - http://amzn.to/2jxjasf. I was almost out of tape so i decided not to do the top box, although i might grab another roll later on to do that.
Similar threads
-
-
Wanted: Design/Dimensions of a Fiesta ST MK7 Intake Heat Shield
- Started by zanderst
- Replies: 0
-
Installed a 2j intake on my 18 fiesta and has a high idle
- Started by braaap1998
- Replies: 2
-
-
FS SOLD Mishimoto Fiesta ST 1.6L Performance Air Intake Kit 2016-2019 Black - $175 + shipping- Started by alpinejook
- Replies: 6
-
Case report: Fiesta ST intake valves carbon build up analysis
- Started by rbr
- Replies: 60
-
Ford Fiesta st2 2015 intake air system fault P2279-95
- Started by Hume
- Replies: 1
-
new intake option available - aFe Takeda direct fit kits for 2014-2015 & 2016+ Fiesta ST's- Started by ron@whoosh
- Replies: 19
-
Fiesta ST Ram Air BIG MOUTH Intake Snorkel by Velossa Tech Engineering - R&D thread!- Started by mercdank
- Replies: 317
