Which Fiesta ST Exhaust System did you purchase?

Which Fiesta ST Exhaust System did you purchase?

  • 2J-Racing

    Votes: 15 3.4%
  • Borla

    Votes: 9 2.1%
  • Cobb

    Votes: 83 19.0%
  • Custom Performance Engineering

    Votes: 27 6.2%
  • FSWerks

    Votes: 37 8.5%
  • Magnaflow

    Votes: 10 2.3%
  • MBRP

    Votes: 82 18.8%
  • Milltek

    Votes: 19 4.4%
  • MRT Rally Sport

    Votes: 7 1.6%
  • Scorpian

    Votes: 3 0.7%
  • Injen

    Votes: 11 2.5%
  • Modern Automotive Performance

    Votes: 26 6.0%
  • Mountune

    Votes: 38 8.7%
  • Custom

    Votes: 17 3.9%
  • TSUDO

    Votes: 10 2.3%
  • Other

    Votes: 42 9.6%

  • Total voters
    436
Member ID
#1996
Messages
175
Likes
18
#61
2J race downpipe bolted up to a Cobb cbe. Sound = sex
 


stuntdoogie

2000 Post Club
Member ID
#426
Messages
2,202
Likes
173
#62
Installed my cobb cbe and its wonderful. For a non resonated exhaust it has very little drone. As a matter of fact from incabin it sounds identical to the resonated magnaflow i had. Cobb didnt rush this exhaust for good reason and Im very pleased.
 


Member ID
#1487
Messages
711
Likes
33
#64
Is the MRT the true straight pipe cuz I feel iffy about a muffler shop making straight pipes
 


Member ID
#2571
Messages
38
Likes
0
#66
I first bought the MRT, the quality was complete garbage. Box was destroyed up delivery, the internals of the box was consistent with zero packaging filler, my exhaust was sliding about 3 feet back and fourth, it was not wrapped at all, one exhaust hanger weld was broken off. and they included all the wrong hardware for the installation, I called them and they were not willing to do much to solve the problem claimed "Oh we have new guys working in the back, they probably just got the hardware mixed up with another order" LOL. Also, one of the tips was a bit tainted as in actually slightly bent in (looked like someone with a butterknife hit it with all they had on one long stroke), when it was installed, none of the hangers really matched up correctly, they were being pulled all different directions at funky angles but still barely managed to make the articulation. Then about a week later, the V-Band 2 1/2 inch exhaust clamp began to develop soot around it indicating a leak. I removed it and cranked it back down 100% tightness (100% is where the blocking plate cuts torque), and it still somehow developed a leak yet again!, took it off and sending it back for the following reasons,

-Bad fitment
-horrendous packaging job
-broken weld out of box
-leaking at the rear
-failure to include proper hardware


*But man, the exhaust sounded so PERFECT*

Cobb has without doubt, the best overall quality and craftsmanship product on the market for our cars in my opinion.

I went then with Cobb and all of the above issues were 100% remedied entirely
 


Member ID
#2708
Messages
156
Likes
39
#67
Bingo. Stories like this just sent me right to Cobb at the outset, and that's what I happily took. There may be better, however from a function of consistency and getting exactly what you ordered and knowing it will fit, Can't say a bad thing about Cobb so far.

I first bought the MRT, the quality was complete garbage. Box was destroyed up delivery, the internals of the box was consistent with zero packaging filler, my exhaust was sliding about 3 feet back and fourth, it was not wrapped at all, one exhaust hanger weld was broken off. and they included all the wrong hardware for the installation, I called them and they were not willing to do much to solve the problem claimed "Oh we have new guys working in the back, they probably just got the hardware mixed up with another order" LOL. Also, one of the tips was a bit tainted as in actually slightly bent in (looked like someone with a butterknife hit it with all they had on one long stroke), when it was installed, none of the hangers really matched up correctly, they were being pulled all different directions at funky angles but still barely managed to make the articulation. Then about a week later, the V-Band 2 1/2 inch exhaust clamp began to develop soot around it indicating a leak. I removed it and cranked it back down 100% tightness (100% is where the blocking plate cuts torque), and it still somehow developed a leak yet again!, took it off and sending it back for the following reasons,

-Bad fitment
-horrendous packaging job
-broken weld out of box
-leaking at the rear
-failure to include proper hardware


*But man, the exhaust sounded so PERFECT*

Cobb has without doubt, the best overall quality and craftsmanship product on the market for our cars in my opinion.

I went then with Cobb and all of the above issues were 100% remedied entirely
 


stuntdoogie

2000 Post Club
Member ID
#426
Messages
2,202
Likes
173
#68
Ive owned 2JR stainless = Over priced droning Garbage. Couldnt tell if had burble and pop because the drone made me deaf.

Maganaflow = small piping, piping outer shell rusted over one winter, no burble only when cold on low throttle and occasional pops. Some drone but nothing like the 2jr.

And now i own Cobbs = superior build quality compared to the other two above. I get more burble than magnaflow but not as much as I would like. Maybe its the stock dp thats muffling it other than that it sounds great.
 


Member ID
#2460
Messages
204
Likes
55
#69
I first bought the MRT, the quality was complete garbage. Box was destroyed up delivery, the internals of the box was consistent with zero packaging filler, my exhaust was sliding about 3 feet back and fourth, it was not wrapped at all, one exhaust hanger weld was broken off. and they included all the wrong hardware for the installation, I called them and they were not willing to do much to solve the problem claimed "Oh we have new guys working in the back, they probably just got the hardware mixed up with another order" LOL. Also, one of the tips was a bit tainted as in actually slightly bent in (looked like someone with a butterknife hit it with all they had on one long stroke), when it was installed, none of the hangers really matched up correctly, they were being pulled all different directions at funky angles but still barely managed to make the articulation. Then about a week later, the V-Band 2 1/2 inch exhaust clamp began to develop soot around it indicating a leak. I removed it and cranked it back down 100% tightness (100% is where the blocking plate cuts torque), and it still somehow developed a leak yet again!, took it off and sending it back for the following reasons,

-Bad fitment
-horrendous packaging job
-broken weld out of box
-leaking at the rear
-failure to include proper hardware


*But man, the exhaust sounded so PERFECT*

Cobb has without doubt, the best overall quality and craftsmanship product on the market for our cars in my opinion.

I went then with Cobb and all of the above issues were 100% remedied entirely
I am curious about one thing with the MRT- was there any interior drone being that it is a straight pipe design? If so how loud/annoying- Thanks!
 


Member ID
#2405
Messages
301
Likes
71
#70
Ive owned 2JR stainless = Over priced droning Garbage. Couldnt tell if had burble and pop because the drone made me deaf.

Maganaflow = small piping, piping outer shell rusted over one winter, no burble only when cold on low throttle and occasional pops. Some drone but nothing like the 2jr.

And now i own Cobbs = superior build quality compared to the other two above. I get more burble than magnaflow but not as much as I would like. Maybe its the stock dp thats muffling it other than that it sounds great.

That is terrible to have to go through 3 exhaust setups to find the right one. I went with COBB right off the bat, the best sounded and build quality exhaust on the market in my opinion. It may cost a little more than the others, but the quality in it self makes it worth it. The stock downpipe does muffle the sound it a little bit for the gurgle and pop. I bought a Dead Hook Motorsports catless downpipe, and man is there gurgle and pops! It sounds so amazing paired with the cobb. The quality of the downpipe is just as good or even slightly better than COBBS CBE. I mean its just amazing sounded. I recommened anyone getting a downpipe go to DHM. IT is so more than worth it!
 


Member ID
#2309
Messages
37
Likes
0
#71
Has anyone from glasgow had a custom exhaust from c and c exhaust's?
 


SICKESSS-ST

Active member
Member ID
#872
Messages
606
Likes
44
#72
That is terrible to have to go through 3 exhaust setups to find the right one. I went with COBB right off the bat, the best sounded and build quality exhaust on the market in my opinion. It may cost a little more than the others, but the quality in it self makes it worth it. The stock downpipe does muffle the sound it a little bit for the gurgle and pop. I bought a Dead Hook Motorsports catless downpipe, and man is there gurgle and pops! It sounds so amazing paired with the cobb. The quality of the downpipe is just as good or even slightly better than COBBS CBE. I mean its just amazing sounded. I recommened anyone getting a downpipe go to DHM. IT is so more than worth it!


Any sounds clips of your set up?
 


Member ID
#2571
Messages
38
Likes
0
#73
the MRT does drone pretty heavily at certain rpm. you will never hear the turbo, or bpv much at all if you have the MRT, I wouldn't suggest it unless all you enjoy hearing is a roaring exhaust note. it popped and burbled like hell and I liked it for about 48 hours. not too subtle
 


Member ID
#1253
Messages
265
Likes
18
#74
My first exhaust was the MBRP, the packaging was very good. The installation was very straight forward and all the hardware was included including new exhaust hangers. The tone of the exhaust was perfect but it was a little loud for me. So now I have the Borla catback and I love the tone and it has a good burble on deceleration. Both exhaust or top notch and quality and Fitnment. But I prefer the Borla over the MBRP.
 


pelotonracer2

1000 Post Club
Member ID
#517
Messages
1,437
Likes
315
#75
I'd be interested in seeing some feedback from other Scorpion exhaust owners. Who's the other three members here who have it?
 


C. love

Active member
Member ID
#507
Messages
546
Likes
84
#76
gosh with all these people having 2-3 exhaust systems seems like I could find a used one for cheap lol.

if I buy new though seems Cobb is the way to go. Others have suggested FSwerks which is one im thinking of
 


airjor13

2000 Post Club
Member ID
#18
Messages
2,751
Likes
426
#77
gosh with all these people having 2-3 exhaust systems seems like I could find a used one for cheap lol.

if I buy new though seems Cobb is the way to go. Others have suggested FSwerks which is one im thinking of
You will not be disappointed with the FSwerks
 


C. love

Active member
Member ID
#507
Messages
546
Likes
84
#79
Thats good to know fellas appreciate the input as I dont want junk.
 


Member ID
#1570
Messages
49
Likes
6
#80
I'd be interested in seeing some feedback from other Scorpion exhaust owners. Who's the other three members here who have it?
I have the Scorpion 3" resonated with a 3" decat downpipe, I think quality, fitment and exhaust note is good, but damn its droning/noisy at wot and certain rpm?s, I have purchased some sounddeadening and soundinsulation for the boot to see if it helps.
 




Top