FS Cubbyhole Extender, AccessPort A-Pillar Mount, Parking Brake Black Hole Cover, Daytime Running Lights Mod, and more

[Old Mike Emerson]

Fits well?

It fits great, love it.

 

[SirThomas88]

So far have sold 31 pedal spacers and covers! Looks like Black is the favorite color choice.
https://razzter.com/product/accelerator-pedal-cover-and-spacer-combo

 

[XR650R]

Just got the pedal put on. Feels great and it's on there nice and solid. Heel-toe will be a lot easier with that extra surface.

 

[Dpro]

I put the pedal and pedal spacer on yesterday and the gas pedal is now right there. So much easier to feather the throttle and It heel toes so easily it’s almost scary. Most likely because I was used to rolling my foot off the edge of the brake to the gas pedal in our cars. Now it almost seems like the gas pedal is in the way when I start braking. lol I am sure I will get used to it. Drove to long with
the stock Ford setup!

 

[Dubcc]

I installed the pedal spacer and cap. Heel toe is so easy to do now. Like others said, it is right there and you only need slight movement of your heel to catch the gas pedal. Great product!! Easy install.


Sent from my iPhone using Tapatalk

 

[RobustFiST]

Just ordered my Red pedal spacer and cover. Eagerly anticipating the new set-up. I just recently realized it wasn't me that forgot how to heel and toe, it's the car!

 

[Old Mike Emerson]

Just ordered my Red pedal spacer and cover. Eagerly anticipating the new set-up. I just recently realized it wasn't me that forgot how to heel and toe, it's the car!

It is a pain and I have small feet LOL

 

[SirThomas88]

Just got the pedal put on. Feels great and it's on there nice and solid. Heel-toe will be a lot easier with that extra surface.

I put the pedal and pedal spacer on yesterday and the gas pedal is now right there. So much easier to feather the throttle and It heel toes so easily it’s almost scary. Most likely because I was used to rolling my foot off the edge of the brake to the gas pedal in our cars. Now it almost seems like the gas pedal is in the way when I start braking. lol I am sure I will get used to it. Drove to long with
the stock Ford setup!

I installed the pedal spacer and cap. Heel toe is so easy to do now. Like others said, it is right there and you only need slight movement of your heel to catch the gas pedal. Great product!! Easy install.

Thank you guys for the feedback! Always such a pleasure to get those first comments in after releasing a new product to my store, especially after having put so much work into it. Please also consider dropping your comments as a review on my website! It can be found on the product page.

 

[SirThomas88]

Update Bump:

I've added new color options for the Pedal Spacer and Pedal Cover: In addition to Black, Red, and Gray, they are now also available in Blue, Orange, and Purple.

Also, I've been working on adding the Shifter Bezel back to my store and should have it available soon, in about a week! I've received several inquiries on when this will be back in stock, so I'm eager to get it available.

 

[15_FiSTy]

Update Bump:

I've added new color options for the Pedal Spacer and Pedal Cover: In addition to Black, Red, and Gray, they are now also available in Blue, Orange, and Purple.

Also, I've been working on adding the Shifter Bezel back to my store and should have it available soon, in about a week! I've received several inquiries on when this will be back in stock, so I'm eager to get it available.

looked today and was bummed there was no shifter bezel. I'll check back soon lol

 

[SirThomas88]

looked today and was bummed there was no shifter bezel. I'll check back soon lol

Yeah it's quite a tricky item to print so I've been tweaking my print settings to get it right. But I think I'm finally happy with it. I'm doing a lot of work for a $10 piece lol. I might make it available today.

Edit: The shifter bezel is now back in stock!

 

[15_FiSTy]

Got one as well as a cubby extender. Looking forward to putting them in.

 

[SirThomas88]

Got one as well as a cubby extender. Looking forward to putting them in.

Thank you! Good color choice.

 

[Business6]

What about the bumper support piece? That damn thing breaks so easily that it shouldn't be much of a challenge to make it stronger/better but doing that and making it fit is a different matter.

I'm just tired of the gap around my headlights.

 

[Orlando628]

got my A-Pillar Mount for Cobb Accessport from the link great product works great! and fast shipping

 

[SirThomas88]

What about the bumper support piece? That damn thing breaks so easily that it shouldn't be much of a challenge to make it stronger/better but doing that and making it fit is a different matter.

I'm just tired of the gap around my headlights.

Hmm I'm not familiar with that piece but if you'd like to PM me with some details I always love considering suggestions for items. I'm not confident however that 3D printed part would be stronger than the OEM due to the limitations of 3D printing however I'd still take a look!

got my A-Pillar Mount for Cobb Accessport from the link great product works great! and fast shipping

Excellent! thanks for sharing and for posting feedback on my website too

 

[Erick_V]

What about the bumper support piece? That damn thing breaks so easily that it shouldn't be much of a challenge to make it stronger/better but doing that and making it fit is a different matter.

I'm just tired of the gap around my headlights.

This! Mine is broken and I didn't realize it till someone made a thread about it and I was like "oh that's what those pieces were" after my IC install lol

Here's some relevant threads:

https://www.fiestastforum.com/threads/sagging-front-bumper.18542/page-2
https://www.fiestastforum.com/threads/front-end-sagging-solutions.28725/page-2

And said piece that breaks easily:

https://parts.ford.com/shop/en/us/reinforcement-6413015-1#sectionId:4103136

 

[FiestaSTdude]

got my A-Pillar Mount for Cobb Accessport from the link great product works great! and fast shipping

I also got mine this week and love it. Very functional and great price!

 

[Business6]

Hmm I'm not familiar with that piece but if you'd like to PM me with some details I always love considering suggestions for items. I'm not confident however that 3D printed part would be stronger than the OEM due to the limitations of 3D printing however I'd still take a look!

This! Mine is broken and I didn't realize it till someone made a thread about it and I was like "oh that's what those pieces were" after my IC install lol

Here's some relevant threads:

https://www.fiestastforum.com/threads/sagging-front-bumper.18542/page-2
https://www.fiestastforum.com/threads/front-end-sagging-solutions.28725/page-2

And said piece that breaks easily:

https://parts.ford.com/shop/en/us/reinforcement-6413015-1#sectionId:4103136

Yeah, that's the cursed part, lol. I've been considering picking one up and seeing if there's a way it can be reinforced but it seems doubtful as the plastic that rests on the crash bar is so damn small & flimsy and it's also attached to the bumper in such a weird way.



Looking at this again (via someone else's pic) I think I'll just end up using the zipties that were shown in that thread, lol.

 

[Erick_V]

Yeah, that's the cursed part, lol. I've been considering picking one up and seeing if there's a way it can be reinforced but it seems doubtful as the plastic that rests on the crash bar is so damn small & flimsy and it's also attached to the bumper in such a weird way.

Looking at this again (via someone else's pic) I think I'll just end up using the zipties that were shown in that thread, lol.

The zipties work but you can only tighten them so much before you start tearing into the plastic core support or the bumper plastic