Rear Sway Bar Torque Spec

[358R]

For those that have installed a rear sway bar, what have you torqued the lower 4 bolts to? I see 80 lb-ft when going back for the lower shock bolt, but I don't see what anyone has used for the lower 4 rsb bolts. My install sheet (Whiteline) and the Hotchkis install sheet don't have numbers listed. Any info is helpful.

 

[TyphoonFiST]

For those that have installed a rear sway bar, what have you torqued the lower 4 bolts to? I see 80 lb-ft when going back for the lower shock bolt, but I don't see what anyone has used for the lower 4 rsb bolts. My install sheet (Whiteline) and the Hotchkis install sheet don't have numbers listed. Any info is helpful.

Dave had one on his old FiST. Hopefully he will see this.

Sent from my SM-N975U1 using Tapatalk

 

[D1JL]

Maximum torque is not required for this application however,

You could tighten any bolt until it brakes.
Then after replacing, not tighten that much the next time.

I use the internet method.

https://www.bing.com/search?q=torqu...sc=3-20&cvid=bb9f965f5cdc4c19b5afc659706c2d92

 

[358R]

Maximum torque is not required for this application however,

You could tighten any bolt until it brakes.
Then after replacing, not tighten that much the next time.

I use the internet method.

https://www.bing.com/search?q=torqu...sc=3-20&cvid=bb9f965f5cdc4c19b5afc659706c2d92

Appreciate it. That's a good page.