Auto Window issues

[Hypergram]

Disconnected the battery yesterday to install my quickshift, and now my driver's side window won't Auto roll up when I pull it for a second, but it works when going down. Any ideas?

 

[kivnul]

Now it works just like my '16!. Try disconnect / reconnect the battery again?

 

[Tonda-B]

You should confirm both positions using the button.

 

[Hypergram]

fixed it with an ignition cycle. Thanks guys.

 

[Erick_V]

Roll the window all the way up and keep pulling up on the switch for a second and it will reset

 

[averyislost]

Roll the window all the way up and keep pulling up on the switch for a second and it will reset

Yep, this is the way I did it when I replaced my driver side window

 

[Remi]

Roll the window all the way up and keep pulling up on the switch for a second and it will reset

Sweet, this just worked for me.
I don't know why the auto up feature stopped working out of the blue. I haven't disconnected the battery lately. Oh well, at least it works again. Thanks for the info!

 

[Nitelife]

I just had to replace my dead battery and of course lost auto-up/down function. I remembered reading you had to reset the switch by holding up/down for a bit each way. I only have been able to reset the auto-down function though. Any suggestions?

Update: Tried again today. Rolled all the way up, released, then held up again, heard a click, and now auto up is working again.

 

[green_henry]

I just had to replace my dead battery and of course lost auto-up/down function. I remembered reading you had to reset the switch by holding up/down for a bit each way. I only have been able to reset the auto-down function though. Any suggestions?

Update: Tried again today. Rolled all the way up, released, then held up again, heard a click, and now auto up is working again.

I had exactly the same experience yesterday (original battery on my '17 finally died). The key is to release; missed that on the first atttempt, re-read your post, and voila! Thanks