DIY Rear Camber Plates???

[TemecFist]

I’ve got a set ordered and they should come in the next few weeks. No hurry here. Good info on the ABS. I never thought of that.

Any update?

 

[Peterson]

Any update?

Yes. I contacted DNA before I put them on. You don’t have to shave anything or mess with your wheel speed sensors. You just don’t put your dust shields back on.

With the DNA Trunk Brace and Camber Plates, the Rear is grippier than ever before.

 

[Dpro]

I just ordered a set. Actually got them for $113 shipped.

 

[Peterson]

I just ordered a set. Actually got them for $113 shipped.

From where? My guy was pretty cheap, but maybe where you got them would be cheaper for the LCAs

 

[Dpro]

From where? My guy was pretty cheap, but maybe where you got them would be cheaper for the LCAs

This is actually a link for front caster bushes LCA’s are at the bottom of the page . I did a Google and this place came up. Since I had looked at the DNA plates in the past I knew this was an insane deal so I jumped. Plus they had paypal which made the ordering and money convo real quick and fast.
https://www.burtonpower.com/front-wishbone-rear-bush-set-fiesta-mk7-2008-inc-st-pff19-1502g.html

 

[TemecFist]

Yes. I contacted DNA before I put them on. You don’t have to shave anything or mess with your wheel speed sensors. You just don’t put your dust shields back on.

With the DNA Trunk Brace and Camber Plates, the Rear is grippier than ever before.

How hard is the install?

 

[Peterson]

How hard is the install?

Jack up the rear.
Take your wheels off.
Take your brake calipers and rotors off.
Take out the 4 bolts on each side.
Whack the back of the dust shields till the hubs come off the pins.
Replace dust shield with Camber Plates.
Reassemble.

 

[TemecFist]

Jack up the rear.
Take your wheels off.
Take your brake calipers and rotors off.
Take out the 4 bolts on each side.
Whack the back of the dust shields till the hubs come off the pins.
Replace dust shield with Camber Plates.
Reassemble.

Awesome! Thanks alot! Did you order them straight from DNA's website?

 

[Peterson]

Awesome! Thanks alot! Did you order them straight from DNA's website?

Nope. I found a vendor here in New Jersey. He primarily deals with DNA’s Arbath parts, but he slipped in my Fiesta parts with his other order.