-
Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!
Pumaspeed X-37 Hybrid Turbo Thread
- Thread starter MS67
- Start date
Got this response today when I asked Pumaspeed if the X37 is being discontinued:
"We can get hold of them but tend not to as it’s very expensive to manufacture a single turbo, we tend to recommend the X-47R now as we get batches of these made up, and they are able to produce more power"
So it sounds like it's not going away completely but will have extremely limited availability moving forward compared to x47r
"We can get hold of them but tend not to as it’s very expensive to manufacture a single turbo, we tend to recommend the X-47R now as we get batches of these made up, and they are able to produce more power"
So it sounds like it's not going away completely but will have extremely limited availability moving forward compared to x47r
Yep, it's more of a generational upgrade and not a size thing, like I was saying Pwnall and Stratified (and maybe others) must have agreed to split a batch or something... But with the x47r, it still spools very nearly the same with a much better design for more power AND is even a little cheaper right now.
Sorry guys, it wasn't obvious to me at all the way things have gone down between us in the past, it looked like he was following the same formula. Also, and I'm really not a grammar Nazi, but the grammar sucked and looked like he was calling me out directly... I digress, and thanks for clearing this up, I do appreciate anyone's opinion as long is it's not mocking anyone just trying to help and I see that now.
Don't quote my post until you apologize for losing your temper and calling me names which I don't do to anybody. It's a fairly common phrase. You don't have to apologize but don't quote my post until you do. I don't need a notification with your name on it. I don't tell people they ride the "short bus" or there "dumb rednecks" from the south anyway it's not a negative term to me. "Between us" I questioned your idea of a motor mount insert you're acting like I stole your wife from you. I like how you threw the grammar Nazi thing in there just another insult hidden in a paragraph. It's okay the person that sent me a message, and the guys that posted on the thread they totally got it. Time to hit the Gym over this nonsense.
I appreciate everybody that understood I was referring to myself, and was nice enough to say something. I guess with my terrible awful grammar it's hard to tell [emoji39] My Wife is on her way back home from upstate New York about a 14 hour drive so wish her luck.
Sent from my LG-LS997 using Tapatalk
I appreciate everybody that understood I was referring to myself, and was nice enough to say something. I guess with my terrible awful grammar it's hard to tell [emoji39] My Wife is on her way back home from upstate New York about a 14 hour drive so wish her luck.
Sent from my LG-LS997 using Tapatalk
Last edited:
Reviving from dead. Finally got around to installing the X37. Mitch@CP-E did the install and tuning. Here are the results:
****Before everyone gets in a tizzy about how these numbers are low, realize these are mustang dyno numbers which measure lower than Dynojet.***
- Baseline (Dizzy V2 93) - 170hp/226tq (I had previously dyno'd this setup on a dynojet at 200hp/285tq)
- X37 (93) - 219hp/246tq
- X37 (E30) - 234hp/262 tq
If I were to go back to the previous dyno the car would probably make about 258hp on 93 and 275hp on E30. So right in the ballpark of what to expect from this little turbo. I love it...car absolutely rips now and pulls hard to redline. Very happy with the power level and honestly wouldn't want any more for my needs.
****Before everyone gets in a tizzy about how these numbers are low, realize these are mustang dyno numbers which measure lower than Dynojet.***
- Baseline (Dizzy V2 93) - 170hp/226tq (I had previously dyno'd this setup on a dynojet at 200hp/285tq)
- X37 (93) - 219hp/246tq
- X37 (E30) - 234hp/262 tq
If I were to go back to the previous dyno the car would probably make about 258hp on 93 and 275hp on E30. So right in the ballpark of what to expect from this little turbo. I love it...car absolutely rips now and pulls hard to redline. Very happy with the power level and honestly wouldn't want any more for my needs.
Stock diverter valve is more than adequate...if you want some ppppsssshhhh get an adapter for the BPV. I had one on my Fist for 30k before I pulled the stock snail for the Gen2 GTX2860 ....plus you don't have to take it out and oil it every so often like you do with the Gofastbits DV one.
Sent from my SM-N950U1 using Tapatalk
Sent from my SM-N950U1 using Tapatalk
Question guys, x37 has been installed for over a month or so, all the bolt ons are done.. car pulls pretty smooth but is it ever enough? Locally no e85 is available but I can zip over to the usa and fill jerry cans up and stock up, will e30 make the car alot quicker with the x37 or should I go x47r and 93oct?
Cheers, jake
Cheers, jake
Similar threads
-
-
Brand new Pumaspeed x47 Hybrid Turbo w/ Turbosmart WGA and Inlet Elbow- Started by fairplayinc
- Replies: 3
-
Pumaspeed X47R Hybrid Turbo Sale! $1580.99! (Most Powerful Hybrid on the Market)- Started by pwnall1337
- Replies: 3
-
Hybrid Turbo 4k miles rebuilt w/new seals Pumaspeed X47-R w/ large bore intake elbow
- Started by FiestaDelDiablo
- Replies: 23
-
Pumaspeed X47R Hybrid Turbocharger sale until 6/23 320whp! (stock fitment)
- Started by pwnall1337
- Replies: 6
-
Pumaspeed X47R Hybrid Turbocharger sale until 6/23 320whp!
- Started by pwnall1337
- Replies: 1
-
-
-
Pumaspeed R-Sport Manifold for stock/hybrid turbos- Started by Zak757
- Replies: 20
-
My Pumaspeed x-37 Hybrid Turbo Install and Review Thread
- Started by boyracer
- Replies: 64
