Calling all Opened Up Grills

[brbauer2]

Was it just pushed in and held in by the rubber border or is it screwed in somehow....I've looked into this before. What size of mesh did you buy and what size rubber tubing did you purchase brbauer?

I got sample sizes of several that I thought I would like before buying the full sheet. I went in halfsies with another guy and the total came out to about $80 iirc

For both cars we got the 12x48" black gloss small diamond with the 1/16" trim . can't remember the length...maybe 12ft?

It's being held on with 4 zip ties - one top, one bottom on each the left and right most vertical slat. When I get around to taking it off I'm going to paint or wrap the verticals black to hide them.

 

[TyphoonFiST]

I got sample sizes of several that I thought I would like before buying the full sheet. I went in halfsies with another guy and the total came out to about $80 iirc

For both cars we got the 12x48" black gloss small diamond with the 1/16" trim . can't remember the length...maybe 12ft?

It's being held on with 4 zip ties - one top, one bottom on each the left and right most vertical slat. When I get around to taking it off I'm going to paint or wrap the verticals black to hide them.

Thanks man....I'm gonna measure our grill holes to see if I can maybe match that pattern with what they have!

Sent from my SM-N950U1 using Tapatalk

 

[brbauer2]

Thanks man....I'm gonna measure our grill holes to see if I can maybe match that pattern with what they have!

Sent from my SM-N950U1 using Tapatalk

iirc the plastic XXL hexagon is a damn close match. Only thing is it's matte not gloss.

https://www.customcargrills.com/proddetail.asp?prod=Dia_Plastic_XXL

Sent from my ONEPLUS A3000 using Tapatalk

 

[TyphoonFiST]

iirc the plastic XXL hexagon is a damn close match. Only thing is it's matte not gloss.

https://www.customcargrills.com/proddetail.asp?prod=Dia_Plastic_XXL

Sent from my ONEPLUS A3000 using Tapatalk

I'll clearcoat it then! meng!

Sent from my SM-N950U1 using Tapatalk

 

[Kawaii AF]

I’m considering going back to the stock crash bar and Cobb IC but this is how it sits now with the DHM crash bar, TiAL Q BOV and DHM Race IC. 2J Racing added the tow hook for me.

which splitter is this? i like it

 

[ROCKYFiestta]

whoooooooooaaaaaaahhhh what intake is that?????

 

[cxwrench]

whoooooooooaaaaaaahhhh what intake is that?????

Quote the post you're talking about, makes it easier. You must be talking about the Velossa Tech Big Mouth that about half the people here have.

 

[Woods247]

which splitter is this? i like it

It’s a Maxton. I ordered it directly from them and had it three days.

 

[TyphoonFiST]

whoooooooooaaaaaaahhhh what intake is that?????

Boomba sells them....I think Ron at whoosh also does....but don't quote me on that!

Sent from my SM-N950U1 using Tapatalk

 

[Woods247]

whoooooooooaaaaaaahhhh what intake is that?????

Snorkel is Velossa Tech and the intake is stock with minor mods. I’ll change the intake to a CPe or ITG when I upgrade the turbo.

 

[zanethan]

Boomba sells them....I think Ron at whoosh also does....but don't quote me on that!

Sent from my SM-N950U1 using Tapatalk

I'll quote you on that..I got mine from Ron at Whoosh.

 

[TyphoonFiST]

I'll quote you on that..I got mine from Ron at Whoosh.

Noice...I was finally right! Someone needs to tell my BAE that!

Sent from my SM-N950U1 using Tapatalk