Brura22's Long Overdue Molten Orange Fiesta ST Build

[Brura22]

So, I planned on starting a build thread RIGHT when I purchased this vehicle.
But, I was so head over heels with driving and modding this thing that I never took the time to really type out and formulate a proper build thread!
Not gonna really start from the top, other than pics from the weekend I picked her up.

Shoutout to Ish for the front end inspiration!

2016 Molten Orange Fiesta ST w/ Recaro Package

Cobb - AP3 - RMM - Exhaust Hanger Kit - Front and Rear Anti-Sway Bars
Mountune - Catback Exhaust - Silicone Boost Hoses - Hi-Flow Charge Pipe - MRX Turbo Kit
Mishimoto - Oil Catch Can - Full Intake - J Line Intercooler
ATP - Catless Downpipe
BC Racing - BR Series Shocks
Fifteen52 - Rally White Tarmacs - Cup Spoilers
Boomba - Throttle Body Spacer - Oil Cap - Ultimate Shift Kit - Black Wing Risers
Pierce Motorsports - Rear Torsion Bar - Front Strut Brace - Lower 2 Point Brace
Snow Performance - Stage 2+ Water/Meth Injection w/ Dual Nozzle Injection
Luxeon - LED Fog Lights Housing
AirLift Performance - V2 Autopilot Air Management - 5 Gallon Stubby Tanks
Misc. Air Bags - Single Bellow Bag Over Coil Fronts - Firestone 7076 Sleeve Style Rears
Viair - 444c Stleath Black Single Compressor
Fender Braces - Black Window Rally Vents
Maxton Design - Carbon Rear Wing Extension
@Built_Boosted - Matte Black Front Splitter
Velossa Tech - Molten Orange Big Mouth Ram Air Intake
CPE Meth-Charge Pipe w/ HKS BOV
Boosted Designs - Dead Pedal w/ Rubber Grommets

First day I picked her up!

When I first got the Tarmacs!

ANNNNND FAST FORWARD A YEAR

 

[jeff]

Awesome build. Been following your MRX thread updates. Thanks for pioneering bro.

 

[letitreign]

Nice build! Did the mishi J line come in black or did you spray it yourself?

 

[Brura22]

Nice build! Did the mishi J line come in black or did you spray it yourself?

Came in black from ModBargains


Sent from my iPhone using Tapatalk

 

[letitreign]

Right on! any chips in it with how exposed it is?

 

[ColoradoST]

Does the bottom of the mishimoto intercooler hang lower than the stock intercooler. Do you have to remove that air damn thing in order to install?

 

[Brura22]

Does the bottom of the mishimoto intercooler hang lower than the stock intercooler. Do you have to remove that air damn thing in order to install?

Its not required to cut as much as I did...
Modbargains sells a direct fit bracket that allows you to pretty much retain all the bumper.

 

[Brura22]

Attended New Mexico Desert Fest this weekend!

 

[Brura22]

Fifteen52 Carbon Fiber flares coming in soon, and Borbet Type A 17x8.5 et 13's!

Get wideeeeeeee

 

[Brura22]

Carbon Fiber [emoji7][emoji7]


Sent from my iPhone using Tapatalk

 

[re-rx7]

Looking gd. If you are in the Dallas area, I will take the Tarmacs off your hands when your ready to sell.

 

[shouldbeasy]

Time to do some trimming in behind those flares!

 

[Brura22]

Time to do some trimming in behind those flares!

It's gonna pain me


Sent from my iPhone using Tapatalk

 

[shouldbeasy]

It's gonna pain me


Sent from my iPhone using Tapatalk

I had my van for 1 month and have already cut 2 holes in it... takes some commitment to put a 4" hole saw to a $70,000 vehicle!!

Measure twice, cut once!

 

[letitreign]

Are you planning on painting them at all? I realize its carbon fiber but I'll be honest, not a big a fan of the carbon fiber flare on an orange car.

 

[Brura22]

Looking gd. If you are in the Dallas area, I will take the Tarmacs off your hands when your ready to sell.

I'd do 400 cash if you want.
Cause they could use a good powder coat refinishing. Which would run around $350 for all 4 in Dallas.



Sent from my iPhone using Tapatalk

 

[eglove]

Are you planning on painting them at all? I realize its carbon fiber but I'll be honest, not a big a fan of the carbon fiber flare on an orange car.

No point buying the carbon fibre then they are offered in FRP if you wanna paint them

 

[Brura22]

Are you planning on painting them at all? I realize its carbon fiber but I'll be honest, not a big a fan of the carbon fiber flare on an orange car.

Staying CF. Actually looks amazing in person. Love the Orange and Carbon with the white.


Sent from my iPhone using Tapatalk

 

[re-rx7]

i'd do 400 cash if you want.
Cause they could use a good powder coat refinishing. Which would run around $350 for all 4 in dallas.



Sent from my iphone using tapatalk

consider them sold.

 

[M-Sport fan]

Staying CF. Actually looks amazing in person. Love the Orange and Carbon with the white.


Sent from my iPhone using Tapatalk

Are you going to get the Borbets in white (or paint them white) as well?