MR230 from Mountune

[KentRatke]

That'd be fun! You should message me when the weather is a bit nicer!

 

[JP_FiST]

What was the Canadian Part# for the dealer?

 

[KentRatke]

What was the Canadian Part# for the dealer?

For the MR230 pack? There isn't one. I ordered it from the USA and brought it across to have it installed.

 

[KentRatke]

I got a GoPro recently, I took a video sample of the how the Mountune exhaust sounds with the MR230 tune and Mountune downpipe. Link: https://youtu.be/rT452g0N0No for anyone interested.

 

[JP_FiST]

I got a GoPro recently, I took a video sample of the how the Mountune exhaust sounds with the MR230 tune and Mountune downpipe. Link: https://youtu.be/rT452g0N0No for anyone interested.

Sounds great!

Have you had any issues with codes and the downpipe? Also any thoughts on emissions? I am tempted to upgrade from MP215 but worried about not passing emissions. I know Cobb does something where it deactivates the o2 sensor, but then it would pass Ontario emissions.

 

[M-Sport fan]

I got a GoPro recently, I took a video sample of the how the Mountune exhaust sounds with the MR230 tune and Mountune downpipe. Link: https://youtu.be/rT452g0N0No for anyone interested.

Is that their catcon-less down pipe, or the catted one?

 

[MoxBoost]

I have the catted and the tone sounds similar to mine.

 

[KentRatke]

What was the Canadian Part# for the dealer?

Just to further clarify, it is my understanding that there is a Ford part number for the MP215 pack, but not the MR230 pack.

 

[CSM]

Kind of a side note but does anyone know why both the MR230 and the DP have been pulled off the Mountune USA site? Was thinking about going the MR230 route soon...

 

[KentRatke]

Is that their catcon-less down pipe, or the catted one?

It's the catted downpipe

 

[KentRatke]

Kind of a side note but does anyone know why both the MR230 and the DP have been pulled off the Mountune USA site? Was thinking about going the MR230 route soon...

I'd love to know this as well

 

[KentRatke]

Sounds great!

Have you had any issues with codes and the downpipe? Also any thoughts on emissions? I am tempted to upgrade from MP215 but worried about not passing emissions. I know Cobb does something where it deactivates the o2 sensor, but then it would pass Ontario emissions.

I've had no issues with codes or anything. Mountune's products are well designed and
built.

I ran a emissions check, which I promised to a long time ago but never got around to until tonight. Both cold and after a 20 minute "spirited" drive in the country, it showed as not ready, meaning fail.

I am not sure if I would risk it if I had emissions testing in my area.

 

[FiSTbump]

Kind of a side note but does anyone know why both the MR230 and the DP have been pulled off the Mountune USA site? Was thinking about going the MR230 route soon...

The MR230 is still on Mountune USA site but they only now offer the ECU calibration. There is no kit anymore. https://www.mountuneusa.com/mountune-MR230-Performance-ECU-Calibration-p/2364-mr-cal.htm
The MR230 checklist includes the requirement for the "mountune downpipe / sportscat", but from my understanding this is also no longer offered...

 

[KentRatke]

The MR230 is still on Mountune USA site but they only now offer the ECU calibration. There is no kit anymore. https://www.mountuneusa.com/mountune-MR230-Performance-ECU-Calibration-p/2364-mr-cal.htm
The MR230 checklist includes the requirement for the "mountune downpipe / sportscat", but from my understanding this is also no longer offered...

Yeah, that was my understanding that. It's a shame they don't offer the downpipe anymore. The MR230 kit was a great buy and a massive improvement to the Fiesta (obviously I'd be biased in my opinion).

 

[CSM]

The MR230 is still on Mountune USA site but they only now offer the ECU calibration. There is no kit anymore. https://www.mountuneusa.com/mountune-MR230-Performance-ECU-Calibration-p/2364-mr-cal.htm
The MR230 checklist includes the requirement for the "mountune downpipe / sportscat", but from my understanding this is also no longer offered...

Very weird....with as much engineering and hype around their downpipe, I'm surprised it's no longer offered. Perhaps they are doing a small redesign before re-releasing it?

Maybe I should send them a quick e-mail. That sucks they no longer offer the kit for MP215 to MR230. IIRC it was very reasonably priced.

 

[CSM]

Just got this e-mail from Mountune:

Hello,

Thank you for your email. Yes the kit will be available again. We have removed it from the website since we are currently out of stock and don't have an exact ETA of when parts we be back in stock and available.

Thank you