-
Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!
M2-Motoring fender flare interest/possible group buy!
- Thread starter M2-Motoring
- Start date
I'm... intrigued, but not quite interested, yet. @RAMMAudio did 15x9 ET36s with some rear camber, front spacers, and rolling and pulling. This leads me to believe that 17x9 ET45s will fit with (much) less work in the back, a larger spacer in the front, and rolling (and maybe some pulling). If these flares allow us to run 10" wheels without a crazy low offset that ruins handling then I might be interested, but Rick is already spacing 9" ET36s on the front which means that a 10" wheel is going to need at least an effective ~ ET23. Time to head over to http://www.racingaspirations.com to make sure that we're not missing the big picture.
Also, I've got to see uninstalled and installed pictures of the flares before I'd place an order. No offense intended, but this thread has been a little too bumpy for me to plop down $500 and cross my fingers that I won't be disappointed when I open the boxes.
Also, I've got to see uninstalled and installed pictures of the flares before I'd place an order. No offense intended, but this thread has been a little too bumpy for me to plop down $500 and cross my fingers that I won't be disappointed when I open the boxes.
Thread Starter
#85
hi guys
just waiting for the first shipment to come in. i will get photos at that time and find a local FiST to mock up the flares with and take some more photos for everyone.
I completely understand everyones reservations about buying stuff blind (i'm the same way). thats why other than some slow updates (thanks to manufacturer lagging), I haven't really pushed a purchase buy or anything. Just a few teasers here and there to show that I've been having a factory work on them.
As soon as the products come in i will definitely update everyone.
Mike
just waiting for the first shipment to come in. i will get photos at that time and find a local FiST to mock up the flares with and take some more photos for everyone.
I completely understand everyones reservations about buying stuff blind (i'm the same way). thats why other than some slow updates (thanks to manufacturer lagging), I haven't really pushed a purchase buy or anything. Just a few teasers here and there to show that I've been having a factory work on them.
As soon as the products come in i will definitely update everyone.
Mike
Thread Starter
#96
Shipment is here and we did mock test fitting today. Thank you to Anthony for volunteering your car for the mock up. Can't wait to see when you're car is done. =)
everything fits great. once the flares are bolting the pieces down, it would snug up pretty well. I personally would use a thin gasket (side skirt trim like on oem side skirts for say toyotas) between the flares and the body of the car to reduce any noise from vibration. on my older cars that ive had fender flares that were not molded to be one piece, this would prevent a squeak noise from fiberglass touching the metal, then vibrating at high speeds. They fit well w/o the liner method, but that's what i've always done. On my project teal fiesta i did the thin gasket method.
overall Anthony liked how it looks on his car. I did not fully install the flares on his car as he's not ready to cut up his car yet lol. but just on the mock up, everything looks great. Let me know thoughts, opinons, questions, etc. thanks!
have 9 sets left one already sold yesterday =)
everything fits great. once the flares are bolting the pieces down, it would snug up pretty well. I personally would use a thin gasket (side skirt trim like on oem side skirts for say toyotas) between the flares and the body of the car to reduce any noise from vibration. on my older cars that ive had fender flares that were not molded to be one piece, this would prevent a squeak noise from fiberglass touching the metal, then vibrating at high speeds. They fit well w/o the liner method, but that's what i've always done. On my project teal fiesta i did the thin gasket method.
overall Anthony liked how it looks on his car. I did not fully install the flares on his car as he's not ready to cut up his car yet lol. but just on the mock up, everything looks great. Let me know thoughts, opinons, questions, etc. thanks!
have 9 sets left one already sold yesterday =)
Similar threads
-
-
-
-
-
-
-
-
Fury Motoring Fender Flares!
- Started by Matthewminder22
- Replies: 40
-
Its sad when they sell you an incomplete bbk (m2 motoring)
- Started by 2006ser
- Replies: 5
-
GB Official M2 Motoring Fender Flare group buy thread
- Started by M2-Motoring
- Replies: 23
