What did you do to your Fiesta ST today ?

[RAAMaudio]

Cobb is the best or one of the best in nearly all they do. I had a Cobb DP and exhaust on my Forester XT, they make great power, it fit perfectly, did not crack, ZERO drone, sounded great.....a well engineered product instead of just putting parts together to sell.

I am sure you have heard plenty of crazy out Subaru turbo cars.

 

[no-pistons]

I made s 1/4" aluminum spacer plate for the gas pedal.

 

[BoostBumps]

I made s 1/4" aluminum spacer plate for the gas pedal.

Very nice! how's doe the additional 1/4" height feel?..are you also planning on doing a 1/2" spacer as well?

 

[no-pistons]

Very nice! how's doe the additional 1/4" height feel?..are you also planning on doing a 1/2" spacer as well?

Haven't driven the car yet since I'm still at work, but just sitting in the car it feels like a slight improvement. However, it also feels like it's still not high enough.

1/4" was the thickest I could go while still using the stock studs and nuts, so I figured I'd try that first and move up from there.

 

[12elentless]

Installed my k&n intake. I love it. My car finally sounds like it's got a turbo on it.

 

[_RED_]

Installed my k&n intake. I love it. My car finally sounds like it's got a turbo on it.

Got any pictures of the install?

 

[12elentless]

My phone was dead at the time. I'll snap a couple in the am. It goes in pretty clean. I'm very satisfied.

And the butt dyno seems to think it pulls a little stronger in mid/high rpm. It certainly sounds meaner.

 

[Teezlr]

I riced out the ST today... but seriously

Little additions... tint, led bulbs, front lip and business decal.

P.S. the bulbs are for reference, I did replace both.

 

[12elentless]

What splitter is that?

 

[Teezlr]

What splitter is that?

EZ Lip, its cheap, looks good and doesn't break when you hit a curb...

 

[12elentless]

Ah. One of those cut to fit deals?

 

[Teezlr]

Ah. One of those cut to fit deals?

Just stick it on and cut the end off, double sided 3m tape... no drilling into the bumper etc.

 

[12elentless]

Where would someone find such a device?

 

[rooSTer]

EZ Lip, its cheap, looks good and doesn't break when you hit a curb...

I agree and to be honest I like the looks of the EZlip...great job.

 

[Teezlr]

I agree and to be honest I like the looks of the EZlip...great job.

Thanks, was an easy decision at $35.

 

[Teezlr]

Where would someone find such a device?

Amazon brah

 

[westcoaST]

Or go to Home Depot and get garage door weatherstripping for $8.00 and some 3M doublestick tape for $5.00. FYI comes off at high speeds, so don't do over 100 mph.

 

[Teezlr]

Or go to Home Depot and get garage door weatherstripping for $8.00 and some 3M doublestick tape for $5.00. FYI comes off at high speeds, so don't do over 100 mph.

Good to know, I don't hit over 45 mph usually so no worries there.

or use the one click purchase option on Amazon and let them deliver it assembled muhahaha... yeah don't care that much to go out of my way to save $15 time is money!

 

[iso100]

I think _RED_ has the MBRP. You could message him to see if he has a video or sound clip.

MBRP Exhaust on 2014 Fiesta ST: http://youtu.be/Lk2WtQqA0_A

MBRP exhaust on Fiesta ST Mk7 7: http://youtu.be/eCU6ZVBRDtY

 

[stuntdoogie]

MBRP Exhaust on 2014 Fiesta ST: http://youtu.be/Lk2WtQqA0_A

MBRP exhaust on Fiesta ST Mk7 7: http://youtu.be/eCU6ZVBRDtY

Doesnt much different than a resonator or muffler delete.