2016 guys with intakes chime in

[madfiesta14]

You 2016 guys will gey sorted, good thing is there is little to no gain with Intake, so just start buying the other bolt ons, namely COBB AP and a IC. You will be much happier dollar per HP

 

[wireless]

You 2016 guys will gey sorted, good thing is there is little to no gain with Intake, so just start buying the other bolt ons, namely COBB AP and a IC. You will be much happier dollar per HP

I'm mainly, personally, wanting the intake just for some additional noise. I am in no rush to do the AP / IC. I will probably do an intake & catback before I do other mods on this car lol

 

[twolf]

I'm mainly, personally, wanting the intake just for some additional noise. I am in no rush to do the AP / IC. I will probably do an intake & catback before I do other mods on this car lol

Didn't someone say there was an Injen intake for the 16s? Injen is the best sounding one, IMO.

 

[wireless]

Didn't someone say there was an Injen intake for the 16s? Injen is the best sounding one, IMO.

I do recall it, but I can't seem to dig up the link again lol.
I'm going to see what Mishimoto/MAP have... but we'll see.

 

[Grizzlebees]

Didn't someone say there was an Injen intake for the 16s? Injen is the best sounding one, IMO.

This is the 2016 Injen intake. It's not a full intake like the 2014-15 version, but it makes noise. I'll try and get a video up soon.

 

[nickstewartroc]

If you want one like this, check out the thread for the Jokers96 setup, looks very similar but a whole lot cheaper!

This is the 2016 Injen intake. It's not a full intake like the 2014-15 version, but it makes noise. I'll try and get a video up soon.

 

[claytonluke81]

That's one expensive filter.

 

[Grizzlebees]

That's one expensive filter.

Unfortunately it's the only one for the 2016 at the moment

 

[nickstewartroc]

Unfortunately it's the only one for the 2016 at the moment

Again:
http://www.fiestastforum.com/forum/...ternative-Intake-the-quot-joker96-intake-quot

 

[StormGaits]

I would say if you guys are that desperate to get some intake noise before a 2016 solution just get a Green drop-in... http://www.amazon.com/Green-Filter-7158-Fiesta-2008-2011/dp/B00DDTNTG2

I had a gift card leftover from Xmas so it cost me nothing. You get obvious benefits - if you get your intake and decide it's too much noise you can go back to stock and still have the Greenie, which I'd say adds 15-20% more noise over the factory filter.

 

[wireless]

Bump... lol.

 

[claytonluke81]

I would say if you guys are that desperate to get some intake noise before a 2016 solution just get a Green drop-in... http://www.amazon.com/Green-Filter-7158-Fiesta-2008-2011/dp/B00DDTNTG2

I had a gift card leftover from Xmas so it cost me nothing. You get obvious benefits - if you get your intake and decide it's too much noise you can go back to stock and still have the Greenie, which I'd say adds 15-20% more noise over the factory filter.

Is there much difference between this and the Cobb filter?

 

[StormGaits]

Is there much difference between this and the Cobb filter?

From what I understand the Cobb filter is a Green filter with a Cobb logo.

 

[nickstewartroc]

From what I understand the Cobb filter is a Green filter with a Cobb logo.

It is, thought it was funny when I went to drop mine in and said right on the filter GreenFilter.com

 

[Grizzlebees]

This is the 2016 Injen intake. It's not a full intake like the 2014-15 version, but it makes noise. I'll try and get a video up soon.

Sorry it took so long to get this posted. Spendy for a noise-maker, but it does the job.

[video]https://youtu.be/2Ek64IN09eA[/video]

 

[madfiesta14]

Would a 2j-r intake work?

 

[NJBooST]

Anyone know where I can find this type of PCV fitting circled in red? Or what this type of fitting is even called?

 

[jayrod1980]

Anyone know where I can find this type of PCV fitting circled in red? Or what this type of fitting is even called?

Finding that would be the holy grail. If you could find a correct sized nipple or neck or whatever that post is, taking an off shelf PCV and some vacuum hose and a Y fitting would allow you to make any existing intake work on a 2016.

I haven't rigged something up myself yet because I don't want to cut my quick connectors off. If we could source these "fittings" we wouldn't need to cut any OEM lines.

 

[claytonluke81]

MAPerformance just posted their 2016 intake.

 

[mishimoto1]

Hey guys!

We have made our presale for our 2016+ Fiesta ST Performance Intake kit live! During this time you can get this intake a discounted price before it hits the market. Check it out below!

Here is a link to our presale thread on this forum, thanks everyone!