-
Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!
What did you do to your Fiesta ST today ?
OP
Thread Starter
#42
- Messages
- 5,778
- Likes
- 1,046
Thread Starter
#42
If you mean these Ford ST mats (EE8Z5413300AA KIT - FLOOR CONTOUR 1 $0.00 $84.70 $84.70) from Tasca Ford Parts online
Then is was less than 15 for shipping
Then is was less than 15 for shipping
Trial and error and patience. I've taken a lot of these off before from different cars, but these were the absolute worst by far. Heat didn't work at all, alcohol didn't work at all either.
After plying off some with those methods (and kind of marring up the passenger side) I found that Goof-off (not goo-gone, two totally different products) kind of worked.
One of the things that I found was that the ink on the sticker prevents any sort of penetration by the liquid. So first step was to soak a towel in goof-off then let it sit on the sticker for a good 10-15 minutes. That will saturate the sticker (it also saturates the plastic and makes it all baggy, but it tightens right back up after about 24 hours of being dry). Then I took a heavy duty Scotch-Brite kitchen pad and rubbed off as much of the ink as I could (especially the yellow stuff at the top). Repeated a number of times. Then I completely resoaked and just started picking it off with my fingernails (credit card was too thick). It would come off in roughly dime sized chunks and it still left a lot of adhesive behind. I had to constantly respray to keep it moist enough.
When it was finally clear of all the sticker I attacked all the left over adhesive by just spraying it down with goof off and scrubbing the crap out of it with a towel. This also took forever because whatever they used for adhesive didn't want to come off and spread all over the place. Eventually though (like 45 minutes per visor) 99% of it was gone. I then used copious vinyl protectant and armor-all and it looks pretty ok.
It's certainly not perfect as you can still see a faint outline of where the sticker was and in some of the places where I had to scrub especially hard it completely smoothed the texturing. The smoothing is much worse in the areas where I was experimenting, but it's still like this in some of the places where I used the above method.
Oh and word of warning, Goof-off will corrode and stain the plastic piece that goes over the mirror (learned that when I set a mostly dry towel on one...oops). So don't do that and mask it off if you're not going to be extremely careful.
So after a couple hours I ended up with slightly damaged/worn visors instead of stickers. It was worth it to me (I can't stand the bright stickers), but I wouldn't necessarily recommend it. YMMV.
After plying off some with those methods (and kind of marring up the passenger side) I found that Goof-off (not goo-gone, two totally different products) kind of worked.
One of the things that I found was that the ink on the sticker prevents any sort of penetration by the liquid. So first step was to soak a towel in goof-off then let it sit on the sticker for a good 10-15 minutes. That will saturate the sticker (it also saturates the plastic and makes it all baggy, but it tightens right back up after about 24 hours of being dry). Then I took a heavy duty Scotch-Brite kitchen pad and rubbed off as much of the ink as I could (especially the yellow stuff at the top). Repeated a number of times. Then I completely resoaked and just started picking it off with my fingernails (credit card was too thick). It would come off in roughly dime sized chunks and it still left a lot of adhesive behind. I had to constantly respray to keep it moist enough.
When it was finally clear of all the sticker I attacked all the left over adhesive by just spraying it down with goof off and scrubbing the crap out of it with a towel. This also took forever because whatever they used for adhesive didn't want to come off and spread all over the place. Eventually though (like 45 minutes per visor) 99% of it was gone. I then used copious vinyl protectant and armor-all and it looks pretty ok.
It's certainly not perfect as you can still see a faint outline of where the sticker was and in some of the places where I had to scrub especially hard it completely smoothed the texturing. The smoothing is much worse in the areas where I was experimenting, but it's still like this in some of the places where I used the above method.
Oh and word of warning, Goof-off will corrode and stain the plastic piece that goes over the mirror (learned that when I set a mostly dry towel on one...oops). So don't do that and mask it off if you're not going to be extremely careful.
So after a couple hours I ended up with slightly damaged/worn visors instead of stickers. It was worth it to me (I can't stand the bright stickers), but I wouldn't necessarily recommend it. YMMV.
Took my lil' FiST out for a fun drive seeing how the weather was pretty nice out here in SoCal. My cheeks are a bit sore from smiling so much.
Anyone in SoCal looking for a fun drive, De Luz Rd from I15 in Temcula to FallBrook will put a smile on your face.
http://www.sundaymorningrides.com/road/1297907/
Anyone in SoCal looking for a fun drive, De Luz Rd from I15 in Temcula to FallBrook will put a smile on your face.
http://www.sundaymorningrides.com/road/1297907/
lol at front rev lights 
Similar threads
-
-
What did you do instead of working on your Fiesta ST today?
- Started by Chaski
- Replies: 257
-
2018 Fiesta ST possible rally build candidate- Started by Northwest
- Replies: 10
-
Did you know your Fiesta ST could.....("secret" features thread)- Started by jeff
- Replies: 173
-
-
-
-
Which Fiesta ST Intercooler did you choose?- Started by rooSTer
- Replies: 522
-
Which Fiesta ST Exhaust System did you purchase?- Started by ATXFiST
- Replies: 398
-
Which clear bra / paint protection film did you purchase for your Fiesta ST?- Started by MKVIIST
- Replies: 23
