• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Fiesta ST Forum and Fiesta ST community dedicated to Fiesta ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Fiesta ST Forum today!


DHM Race Crash Bar and Intercooler!

Trader history for DHM (0)

Sourskittle

4000 Post Club
Messages
4,567
Likes
861
Location
Lakeland
Lmao, that's F-ed up man.... Never thought I'd see an air to air cooler perform like that, essp on 25+psi...
 


Messages
137
Likes
34
Location
flagstaff
Don't forget the meth. I have two aem 250 cc nozzles, one at the fmic outlet and one before the t body. Russ is the man!

And I haven't opened the grill yet...
 


Sourskittle

4000 Post Club
Messages
4,567
Likes
861
Location
Lakeland
Don't forget the meth. I have two aem 250 cc nozzles, one at the fmic outlet and one before the t body. Russ is the man!

And I haven't opened the grill yet...
Ahhhhh !!!! I totally did forget the meth. Your running 100%, right? Its gotta be making some super cereal power for that turbo at elevation... If you come down off the mountain, its gonna feel like a space shuttle with extra atmosphere pressure !! Lol
 


Sourskittle

4000 Post Club
Messages
4,567
Likes
861
Location
Lakeland
If you have a AEM kit, twist that tiny hex on the top of it two full turns clock wise and put 100% meth in the tank ;)
 


Sourskittle

4000 Post Club
Messages
4,567
Likes
861
Location
Lakeland
What's awesome about the intercooler is that charge air temps go down at WOT.
In the case of the plot posted above, the charge temps are dropping below ambient due to the meth, but the cooler typically keeps them close to dead level with ambient.

Anyone with a stock turbo and pro-tune have one and datalogs?
 


OP
DHM1

DHM1

1000 Post Club
Messages
1,676
Likes
823
Location
Royal Oak
Thread Starter #549
In the case of the plot posted above, the charge temps are dropping below ambient due to the meth, but the cooler typically keeps them close to dead level with ambient.

Anyone with a stock turbo and pro-tune have one and datalogs?
I have a bunch from customers I just have to find them lol

Russ
 


Sourskittle

4000 Post Club
Messages
4,567
Likes
861
Location
Lakeland


Its such a scary thought to think the bottom cooler in the pic is an upgraded one, and the race cooler just dwarfs it.
 


Perfblue15

1000 Post Club
Messages
1,375
Likes
342
Location
Canyon country


Its such a scary thought to think the bottom cooler in the pic is an upgraded one, and the race cooler just dwarfs it.
Right! I can't wait to compare it to my j line and see how much bigger it really is. I cannot say enough about [MENTION=1098]DHM[/MENTION] 's customer service. Russ went so far as to add custom tabs and brackets to my bumper bar to mount my mishimoto oil cooler. I seriously feel like a kid waiting for Christmas. Patiently waiting for my stack of boxes from DHM to show up at my door.
 


RAAMaudio

5000 Post Club
Messages
5,268
Likes
925
Location
Carson City
DHM, Russ, best products for the money I have ever bought for any car and I have modded many.

The J-line is a very heavy IC, other ICs weight less...the DHM Race IC and bumper beam only weigh 4lbs more than the stock IC and beam!

Drag racers like weight up front, road racers, autocrossers, canyon carvers, not so much.
 


Messages
123
Likes
32
Location
Omaha
is it an option to get a BOV flange on the IC? I PM'd you, Russ.
Russ, apologies for the noob question, but what application does this custom flange option benefit and what is the advantage as opposed to not having a flange there? I guess I always thought BOVs and IWGs were usually installed closer to the turbo side rather than the intercooler side. Again, I dont know much so please keep the flames at minimum.
 


twolf

Active member
Messages
607
Likes
266
Location
Canton
Russ, apologies for the noob question, but what application does this custom flange option benefit and what is the advantage as opposed to not having a flange there? I guess I always thought BOVs and IWGs were usually installed closer to the turbo side rather than the intercooler side. Again, I dont know much so please keep the flames at minimum.
it's on the hot side of the intercooler so it's essentially the same as being right after the turbo outlet. not a big deal. I only did it because I'm trying to pick up as many big turbo supporting mods as I can before I actually go big turbo.
 


Hijinx

3000 Post Club
U.S. Air Force Veteran
Messages
3,290
Likes
1,669
Location
Auburn, AL, USA
it's on the hot side of the intercooler so it's essentially the same as being right after the turbo outlet. not a big deal. I only did it because I'm trying to pick up as many big turbo supporting mods as I can before I actually go big turbo.
If you're standing in front of the car looking at the intercooler your BOV is on the left?
 


twolf

Active member
Messages
607
Likes
266
Location
Canton
If you're standing in front of the car looking at the intercooler your BOV is on the left?
nope, I don't have my IC yet, Russ has been busy lately.

I was mistaken, it is indeed on the cold side



Regardless I don't think it's a huge deal.
 


Hijinx

3000 Post Club
U.S. Air Force Veteran
Messages
3,290
Likes
1,669
Location
Auburn, AL, USA
[MENTION=3302]gizyuluu[/MENTION] the bottom line is preference. I have mine there because it looks awesome.
 


twolf

Active member
Messages
607
Likes
266
Location
Canton
[MENTION=3302]gizyuluu[/MENTION] the bottom line is preference. I have mine there because it looks awesome.
mhm. and I figured Russ wouldn't have an issue with just selling me a charge pipe without the flange when that time comes. I got my Tial custom coated :)
 


Messages
112
Likes
20
Location
Monterey Park
i just wanted to confirm to everyone that has a MAP hard charge pipe kit that it will not fit with DHM race intercooler, it doesn't have enough flex in it to make it fit. i was thinking about cutting it apart and use couplers to give it more flex but then i was scared of having to many connections and having them come apart so i decided to just use oem hose for now but i was thinking about getting mountune ones but their really expensive for just silicone.

IMG_3873_2.jpg
 


Messages
123
Likes
32
Location
Omaha
it's on the hot side of the intercooler so it's essentially the same as being right after the turbo outlet. not a big deal. I only did it because I'm trying to pick up as many big turbo supporting mods as I can before I actually go big turbo.
Good to know as this is the road I am heading down as well. Thanks for the info guys.
 




Top