The Official Fiesta ST Wheels Thread

[Charest2394]

Thanks, the Wheel looks really good with the car!

 

[EbAvery]

what to do guys think of these? Also I'm new to the whole modification idea, my last vehicle was a 97 ranger. So my question is would these work with the OEM tires?
Offset:40mm
Bolt Pattern:4-108
205/40-17

 

[CanadianST]

what to do guys think of these? Also I'm new to the whole modification idea, my last vehicle was a 97 ranger. So my question is would these work with the OEM tires?
Offset:40mm
Bolt Pattern:4-108
205/40-17

Unless I'm missing it somewhere you didn't list the diameter and width of the wheel itself. Without knowing that info we can only make uninformed guesses.

 

[RAAMaudio]

17x7.5

$148 (each)
Offset: 40mm Backspacing: 5.826" Bolt Pattern: 4-108
Rec. Tire Size:205/40-17
Weight: 22.0lbs.


OUCH!!!! All great but the weight


I have had a few hundred sets of wheels, really, that style and variations has always been my favorite.

It the were under 18 lbs I might buy a set but that is really pushing my limit, tires are the most important mod, wheels next, for real performance.

 

[rooSTer]

what to do guys think of these? Also I'm new to the whole modification idea, my last vehicle was a 97 ranger. So my question is would these work with the OEM tires?
Offset:40mm
Bolt Pattern:4-108
205/40-17

I really like those wheel...reminds me of these.

 

[EbAvery]

Ya I know the weight is pretty much the same as the OEM wheels,honestly I want some OZ racing formula HLT but I can't afford them, I'm still in school

 

[RAAMaudio]

I understand about affording things, you are blessed just to have such a great car while still in school, being able to mod it at least a bit is a very nice additional blessing, spending a bit more to get what you a really want.....perhaps you can hold off, find a sale later, sell something you can live without, do a side job to make more to buy the ones you know are just better for your real performance car....it will be more rewarding if you make it happen

 

[RAAMaudio]

Konig made, good quality, 17lbs, $105 each at treaddepot
5-6 lbs per corner is a HUGE performance gain as it effects all aspects dramatically, instantly feel it, ride better as well.

The one below looks like the others shown, $115, not sure the weight.

This Konig weighs 16.5 lbs, $144 on the site I found it.

 

[E365]

I've been digging around and haven't seen anyone use the 16" wheels from a non-ST/standard Fiesta Do those fit?

Seems like a good option for winter wheels. Probably could find some cheap on CL, also wouldn't need hubcentric rings like many aftermarket wheels.

 

[rooSTer]

I've been digging around and haven't seen anyone use the 16" wheels from a non-ST/standard Fiesta Do those fit?

Seems like a good option for winter wheels. Probably could find some cheap on CL, also wouldn't need hubcentric rings like many aftermarket wheels.

Regular Fiesta wheels will fit no problem.

 

[E365]

Thanks! I figured so.

 

[dyn085]

2000-2007 (iirc) Focus wheels well fit as well-

Sean Hyland Motorsports Evo's

 

[rooSTer]

2000-2007 (iirc) Focus wheels well fit as well-
Sean Hyland Motorsports Evo's

Yup and 2008-2011 NA models too.

 

[Woem]

Which one do you prefer?

 

[rodmoe]

Lower Right

 

[Woem]

My first thought was the barracuda (3th row right) but I love my multi spoke rims so it will probably be the upper right tec as2 in gunmetal

 

[Kip2MyLou]

Can you give the names for all those rims, if you don't mind? There's a good many in there I like.

 

[Woem]

From left to right
Stock - tec as2 gunmetal
Compomotive mo5 - barracuda karrizma
Oz Superturismo silver - Oz Superturismo black
Tec as2 silver - alutec wizard

 

[rooSTer]

I'm leaning towards the Compomotive mo5

 

[Kip2MyLou]

Thanks, but now the picture won't come up.