Updated 7/20/2016
FYI...Peron just posted this on Facebook today
https://www.facebook.com/PERONtuned...8711918323170/511456952381997/?type=3&theater
https://www.facebook.com/PERONtuned...8711918323170/511456952381997/?type=3&theater
https://www.facebook.com/PERONtuned/photos/pcb.513844885476537/513840138810345/?type=3&theater
We finally completed the production tune on Ian's car built by CLP Automotive. 331hp / 324.40 ftlb @ the wheels.
- PERON P3XX Twin Scroll Turbo Kit (BorgWarner Performance Aftermarket EFR6258)
- Turbosmart B1 frame EFR Actuator
- PERON P3XX V2 Intercooler
- PERON Flash Ford STG4 Map
- AEM Meth Kit
- Shell V-Power 98RON pump fuel
- Stock transmission and clutch
- Stock fuel system
Maximum torque is produced at 4000rpm, we had it at 3700rpm but the larger volume intercooler added a few 100 rpms to peak torque - but was required to keep charge temps at only a few degrees above ambient even on 5th gear runs. We have some 340whp pulls which will go onto our blog posts, but this is our boost group 2 settings peaking at 26psi and holding 24psi. It's super smooth and feels very strong at this level of boost. We will now continue to test on the EFR6758 and 7163 twin scroll options to allow even more power and limit the lag associated with these power levels.
Dyno Results Summary ...
>250whp (>4100rpm) / >300whp (>5200rpm) / 331whp @ 6550rpm
>250tq (3500~6900rpm) / >300tq (3900~5500rpm) / 324tq @ 4240rpm
Peak Boost (26psi) / 24psi @ ~7200rpm
https://www.facebook.com/perontuned/photos/pcb.400247606836266/400246066836420/?type=1&theater
"Our all new robotic welded Fiesta ST Twin-Scroll Borg-Warner EFR turbo manifold featuring a fully billet SS merge collector. Want a big turbo with fast spool? This is your solution."